20 mm intake manifold suitable for various Zündapp Sport Combinette type 510, 515, etc. small engine bikes.
Can also be adapted to mopeds if necessary, provided the hole spacing of the inlet is correct.
Connection diameter: 25 mm
Hole spacing: 45 mm
| Material | Aluminum |
| Area of application | Tuning |
| Hole spacing inlet | 45 mm |
| Ø inside | 20 mm |
| Ø External connection | 25 mm |
| Mounting type | Screws |
| Number of fixing points | 2 pcs |
| Zündapp |
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Height: 5.3 mm · Total length: 145 mm · Color: silver · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5 mm · Width: 105 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Thread length: 8 mm
EUR 12.90
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø Pin: 4.15 mm · Ø bore: 4.2 mm
EUR 40.10
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11.70
EUR 26.00/l
Luster terminal 3-pole black small (0.1 - 2.5 mm²)
Cable cross-section: 0.1 - 2.5 mm · Number of connections: 6 pcs · Manufacturer: Made in Germany · Material: Brass · Material: Plastic · Material: Steel · Area of application: Workshop accessories · Color: black · Clamping diameter: 3.3 mm · Height: 15.5 mm · Total length: 18.5 mm · Width: 22 mm · Number of components: 1 pcs
EUR 1.65
Power cable 1-core black 0.75 mm² (per meter)
Cable cross-section [mm²]: 0.75 mm² · Ø single core: 0.15 mm · Manufacturer: Made in Italy · Ordering unit: Per meter · Material: Copper · Material: Plastic · Surface: raw · Area of application: Standard · Color: black · Number of cables: 1 pcs · Ø outside: 1.8 mm · Total length: 1000 mm
EUR 1.65
Dell'Orto 21 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 21 mm · Carburetor type: PHBG AS · Color: black · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 92 · Ø Internal connection: 24 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 38 mm · Height: 125 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Total length: 82 mm · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Width: 72 mm · Choke nozzle size: 60 · Nozzle block: 262AU · Camouflaged: No · Size of secondary nozzle: 50
EUR 141.70
Collection only possible with online purchase and appointment.
