High-quality Streetpower racing muffler for your Puch Maxi S moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Material | Steel |
| Surface | blank |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Mounting type | Nuts |
| Ø Flame tube outside | 30 mm |
| Ø Internal connection | 28 mm |
| Exhaust type | Cone / double cone |
| Number of fixing points | 3 pcs |
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Mounting type: Welded lug · Ø Silencer: 60 mm · Ø Internal connection: 23 mm · Total length: 830 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Ø outside: 95 mm · Flame tube attachment: Flange
EUR 219.40
HOMOET Exhaust "P6 Special" 28 mm polished | Puch Maxi, X30
Manufacturer: HOMOET · Material: Steel · Surface: blank · Mounting type: Welded lug · Ø Silencer: 50 mm · Ø Internal connection: 24 mm · Total length: 935 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Ø outside: 88 mm · Flame tube attachment: Flange
EUR 349.90
Hot 
HOMOET "P6" Exhaust, 28 mm, Polished | Puch Maxi, X30
Manufacturer: HOMOET · Material: Steel · Color: gray · Surface: raw · Surface: varnished · Mounting type: Tab · Ø Silencer: 50 mm · Total length: 900 mm · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Ø outside: 88 mm · Flame tube attachment: Stud bolts & nuts
EUR 338.00
Not in stock
Explore categories from Exhaust system
Moped fans also bought
Hot
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Thickness: 3 mm · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm · Area of application: Tuning
EUR 8.80
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.65
Working late? Evening hours on Thursday until 20:00
