High-quality Streetpower racing muffler for your Puch Maxi N moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Total length | 940 mm |
| Manufacturer | AKOA |
| Material | Steel |
| Surface | blank |
| Ø Silencer | 60 mm |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 30 mm |
| Exhaust type | Cone / double cone |
| Mounting type | Nuts |
| Number of fixing points | 3 pcs |
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø outside: 95 mm · Total length: 830 mm · Ø Silencer: 60 mm · Ø Internal connection: 23 mm · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 219.40
HOMOET exhaust "P6 Special" (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Ø outside: 88 mm · Total length: 935 mm · Ø Silencer: 50 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 349.90
Not in stock
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Ø outside: 88 mm · Total length: 900 mm · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Tab · Number of fixing points: 2 pcs · Flame tube attachment: Stud bolts & nuts
EUR 338.00
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Number of components: 3 pcs · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Total length: 28 mm · Area of application: Tuning
EUR 21.20
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nipple shape: Cylinder
EUR 2.85
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Cable length: 1600 mm · Ø nipple: 8 mm · Nipple length: 12 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nipple shape: Barrel (transverse)
EUR 2.85
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Ø outside: 5 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
EUR 2.35
GPO 85° carburetor pipe bend brass M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Manufacturer: GPO · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Total length: 45.5 mm · Total length: 53.5 mm · Height: 30 mm · Ø outside: 6 mm · Internal thread: M5x0.8 (standard thread) · Angle: 85 ° · Width across flats nut: 8 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.00
Polini CP 21 mm carburetor (hand choke) rubber flange
Nominal diameter: 21 mm · Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: CP · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Choke control: Hand choke · Total length: 71 mm · Nozzle size: 100 · Height: 132 mm · Width: 66 mm · Ø Inside entrance: 42 mm · Ø Output inside: 22.5 mm · Ø Air filter connection: 47 mm · Mounting type: Rubber sleeve · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Size of secondary nozzle: 40
EUR 166.00
Not in stock
Polini 43.5 mm cylinder kit reed valve with head | Puch
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Nominal diameter: 43.5 mm · Ø cylinder neck: 48 mm · Ø piston pin (B): 12 mm · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Area of application: Racing · Area of application: Tuning
EUR 474.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
