Complete brake anchor plate from the manufacturer Grimeca, including brake pads, suitable for the front brake of Peugeot 103 SP and MVL rims.
With a little skill, the brake plate can also be adapted for Puch bikes. To do this, the collar of the anchor plate and the mounting of the locking cam of the fork must be milled off a little.
Ø outside brake shoes: 90 mm
Width brake shoes: 20 mm
Ø Bore for wheel axle: 12.2 mm
Ø outer brake plate: 110 mm
Height collar (from outer side of plate): 10 mm
Height mounting locking cam: 10 mm
Further accessories such as brake shoes or other brake anchor plates can be found in the accessories section.
| Material | Aluminum |
| Surface | sandblasted |
| Ø outside | 110 mm |
| Ø External brake pads | 90 mm |
| Ø axle | 12 mm |
| Ø bore | 12.2 mm |
| Puch |
| Peugeot |
Ratings
Accessories & related products
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø Bundle: 6 mm · Ø outside: 8 mm · Total length: 15 mm · Thread length: 7 mm · Width across flats: 7 mm
EUR 2.95
swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Ø inside: 12 mm · Width: 35.7 mm · Ø outside: 29.02 mm · Height: 5.9 mm · Height: 9.9 mm · Ø shaft: 11.95 mm · Shank length: 74.5 mm · Total length: 165 mm · Ball bearing closed: Yes · Thread length: 40.5 mm · Thread length: 50 mm · Width across flats: 19 mm
EUR 46.10
Moped fans also bought
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Area of application: Tuning · Total length: 47 mm · Ø inside: 14.5 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total height: 54 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Mounting type: Screws · Camouflaged: Yes
EUR 14.10
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve · Wheel size: 16 - 17 " · Wheel size: 17 "
EUR 11.70
Exhaust cigar 28 mm chrome | Puch Maxi S, N / X30 NS, NL
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Flame tube attachment: Flange · Ø outside: 70 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Ø Internal connection: 28 mm · Number of fixing points: 1 pcs · Total length: 920 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug
EUR 47.30
IMCA shock absorber 30 cm black
Manufacturer: IMCA · Material: Steel · Surface: varnished · Damping type: Spring · Ø outside: 45 mm · Adjustable: Yes · Color: black · Mounting type: Nuts & bolts · Ø Fastening inside: 10 mm · Ø spars: 28 mm · Number of fixing points: 2 pcs · Hole spacing: 300 mm
EUR 60.30
Side stand black | Puch Maxi S, N, P1 / Supermaxi LG1, LG2 / X30 NS, NL, NG, N-2AH
Manufacturer: Made in Portugal · Total length: 340 mm · Material: Steel · Surface: powder-coated · Color: black · Mounting type: Screwed clamp · Adjustable: Yes · Length pivot point - floor: 220 mm · Number of fixing points: 2 pcs
EUR 23.60
Collection only possible with online purchase and appointment.
