Original Sachs coaster brake rear hub compatible with various mopeds.
This rare hub is the latest, third generation, featuring an aluminum shell. It is compatible with various makes and models featuring 17-inch rims. These include, for example, the Zündapp Belmondo, Hercules 621, DKW Hippie, Bonanza, and Express, as well as many other models equipped with Sachs 503 HG engines and 17-inch wheels.
The sprocket, with its 37 teeth, is riveted and can be replaced.
The coaster brake hub is shipped without a brake anchor plate. The wheel axle, including all internal components, is included.
Note: New coaster hubs must be installed by a qualified professional in accordance with the relevant factory documentation. The bearing play must be checked after installing the brake anchor plate and readjusted if necessary. You’ll find our tutorial on this below. Improper handling and any resulting damage do not constitute grounds for a warranty claim.
You can find additional hub bodies, an alternative sprocket, and matching screws, as well as a brake pad and overhaul kits, in the accessories section.
NOS – New from old inventory.
| Manufacturer | Sachs |
| Material | Aluminum, Steel |
| Surface | galvanized (blue), chrome-plated |
| Ø axle | 10.5 mm |
| Ø bolt circle | 105.5 mm |
| Number of spoke holes | 36 pcs |
| Ø drum | 90 mm |
| Thread type | MF10.5x1 (fine pitch thread) |
| Area of application | Original |
| Sachs |
| Zündapp Belmondo |
| Hercules |
Accessories & related products
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm · Ø shaft: 10.5 mm · Shank length: 95.6 mm
EUR 28.40
Not in stock
ESJOT Gear Ring, 37 Teeth, Reverse, Galvanized
Chain type: 415H · Ø inside: 94 mm · Thickness: 4.1 mm · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Chain pitch: 1/2" x 3/16" · Number of teeth: 37 pcs · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6.5 mm · Hole spacing: 74 mm
EUR 56.80
swiing® revival screw set for sprocket mounting coaster brake
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Color: gray · Number of components: 12 pcs · Drive: External hexagon · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Shank: No · Nominal diameter (thread): 6 mm · Width across flats: 8 mm · Width across flats: 10 mm · Thread length: 12 mm
EUR 23.60
ESJOT Gear Ring, 45 Teeth, Reverse, Galvanized
Chain type: 415H · Ø inside: 94 mm · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Chain pitch: 1/2" x 3/16" · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6.4 mm
EUR 65.20
Coaster hub HR 90V with sprocket 32 t. (with water damage) NOS | Puch X30 Velux Automat
Manufacturer: Sachs · Color: silver · Ø axle: 10.5 mm · Area of application: Original · Number of spoke holes: 36 pcs · Thread type: MF10.5x1 (fine pitch thread) · Ø drum: 90 mm · Puch OEM number: 320.5.41.002.0
EUR 450.80
Rear Hub with 50-Tooth Sprocket for 17" NOS | Sachs 504 HG
Manufacturer: Sachs · Area of application: Original · Surface: chrome-plated · Surface: galvanized (blue) · Thread type: MF10.5x1 (fine pitch thread) · Number of spoke holes: 36 pcs · Ø axle: 10.5 mm · Ø drum: 90 mm · Ø bolt circle: 105.5 mm
EUR 830.40
Explore categories from Hub & axle
Moped fans also bought
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Nut type: Hexagon nut 1D · Drive: External hexagon · Height: 10 mm · Thread type: MF10.5x1 (fine pitch thread) · Nominal diameter (thread): 10.5 mm · Width across flats: 17 mm
EUR 8.20
swiing® revival wheel nut M10.5x1 x 5 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut 0.5D · Height: 5 mm · Drive: External hexagon · Nominal diameter (thread): 10.5 mm · Thread type: MF10.5x1 (fine pitch thread) · Width across flats: 17 mm
EUR 7.60
Hot 
swiing® revival rim ring 1.20 x 19" (37 mm) high-gloss aluminum
Nominal diameter: 485 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: polished · Wheel size: 19 " · Rim well depth: 6.2 mm · Overall width outside: 36.7 mm · Color: silver · Number of spoke holes: 36 pcs · Ø Nipple hole: 5.5 mm · Jaw width [mm]: 27.7 mm · Jaw width [inch]: 1.2 "
EUR 118.50
Working late? Evening hours on Thursday until 20:00
