Nice disc brake system for your Puch moped / moped with 5-star cast rim and EBR telescopic fork with mount for a brake caliper.
The disc brake system is factory-filled with brake fluid.
The disc brake system is filled with brake fluid ex works and is supplied ready for installation with all necessary components.
Scope of delivery:
- Brake disc Ø 240 mm
- Hub with ball bearings already installed
- Brake caliper
- 850 mm long steel flex hose
- Brake lever
- Mounting plate for attaching the brake calliper
- 12 mm wheel axle with all nuts and washers
- Bolts for mounting the hub to the rim
Notes: Mounting on the original fork is not possible. An EBR fork with the option of attaching a brake calliper is required (see accessories).
The hub fits in original Grimeca as well as in the reproduction rims in the accessories.
The disc brake kit works, but will not knock anyone off their saddle in terms of quality. You can find the high-quality alternative in the accessories section.
| Manufacturer | Quenching |
| Ø Handlebars | 22 mm |
| Cable length | 850 mm |
| Ø outside | 240 mm |
| Puch |
Accessories & related products
Brake line 0.9 - 1.9 m (selection) black 28 / 90° incl. banjo bolts
Mounting type: Screws · Material: Rubber · Material: Steel · Color: black · Thread type: MF10x1.25 (fine pitch thread) · Cable length: 900 mm · Cable length: 1000 mm · Cable length: 1150 mm · Cable length: 1400 mm · Cable length: 1600 mm · Cable length: 1700 mm · Cable length: 1900 mm
EUR 28.30
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Ø wire: 2.4 mm · Leg length: 45 mm · Length spring hook: 50 mm · Surface: galvanized (blue) · Material: Spring steel · Total length: 125 mm · Ø inside: 25.5 mm · Ø outside: 30 mm · Area of application: Original · Area of application: Standard
EUR 5.80
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Surface: coated · Color: blue · Material: Spring steel · Total length: 28 mm · Ø inside: 4.8 mm · Number of components: 3 pcs · Ø outside: 8.3 mm · Area of application: Tuning
EUR 21.20
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Mounting type: Union nut · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.70
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Material: Plastic · Test mark: none · Bulb holder: BA15s · Tension: 6 V · Color: black · Color: red · Number of fixing points: 2 pcs · Ø Receptacle: 4 mm · Depth: 80 mm · Battery operated: No · Width: 60 mm · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Height: 110 mm
EUR 43.20
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Surface: chrome-plated · Color: Chrome · Mounting type: Fork plate · Material: Steel · Clamping diameter: 22 mm · Fork plate holder length: 100 mm · Width: 730 mm · Height: 400 mm · Ø outside: 22 mm · Length handlebar ends: 150 mm · Crossbar: Yes
EUR 42.40
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11.70
EUR 26.00/l
Collection only possible with online purchase and appointment.
