High-quality 43 mm gray cast iron racing cylinder compatible with your Piaggio Ciao, Si, Bravo, or Boxer moped.
The racing cylinder, with a displacement of 65 ccm, is ideal for an everyday tuning setup. The tuning cylinder features 6 overflow channels, which ensure consistent power across the entire RPM range.
Piston pin diameter: 12 mm
Notes:
To achieve optimal performance, the intake port on the engine block and the area around the overflow channels should be modified accordingly. A tutorial for modifying the intake port is linked below.
You should also use at least a 12/12 carburetor.
It is recommended to install a cylinder head with a larger diameter. Please pay attention to the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find compatible cylinder heads, replacement pistons, and oil mixture in the accessories section.
A quality product from the Italian manufacturer DR Racing Parts.
| Nominal diameter | 43 mm |
| Manufacturer | DR Racing Parts |
| Material | Gray cast iron |
| Camouflaged | No |
| Area of application | Tuning |
| Surface | varnished |
| Displacement | 65 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 46 mm |
| Ø Outlet outside | 22.3 mm |
| Ø outlet inside | 18 mm |
| Ø piston pin (B) | 12 mm |
| Number of fixing points | 3 pcs |
| Outlet type | clamped |
| Hole pattern [mm] | 55 x 34 |
| Decompressor | Yes |
| Piaggio |
Accessories & related products
Normio M7 Stainless Steel Nut
Manufacturer: Normio · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut · Nominal diameter (thread): 7 mm · Drive: External hexagon · Height: 5.5 mm · Width across flats: 11 mm · Thread type: M7x1 (standard thread) · Piaggio OEM number: 020107, 1107, 226745
EUR 2.85
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Area of application: (Dis)assembly tool · Number of components: 7 pcs · Width across flats: 10 mm · Width across flats: 17 mm
EUR 23.60
DR 43 mm piston (12 mm KoBo) Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Ø outside piston (A): 42.9 mm · Compression height (C): 26.1 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.5 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 43 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.2 mm · Ø piston pin (B): 12 mm · Weight piston kit: 83 g
EUR 79.40
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
EUR 14.10
Explore categories from Cylinder
Moped fans also bought
Hot 
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Capacity: 0.26 µF · Area of application: Original · Area of application: Standard · Mounting type: Tab for screwing · Height: 26 mm · Connection type: Cable for screwing · Ø outside: 18 mm · Ø mounting hole: 4.4 mm · Total height: 31 mm · Piaggio OEM number: 102939
EUR 14.10
SKF 6202 C3 ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Bearing cage: Sheet steel cage ball-guided · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: SKF · Bearing clearance: C3 · Width: 11 mm · Ø inside: 15 mm · Ø outside: 35 mm · Puch OEM number: 900.4.6202
EUR 11.80
Working late? Evening hours on Thursday until 20:00
