Exhaust manifold (exhaust pipe) suitable for Sachs 504 and 505 mopeds / mopeds.
The manifold is attached / clamped to the cylinder with a clamp.
At the rear part of the flame pipe, the exhaust bend has a thickening to Ø 28 mm. This means that all tailpipes with Ø22 mm and Ø28 mm can be fitted.
The clamp for attachment to the cylinder is included in the scope of delivery.
Details
Surface | chrome-plated |
Material | Steel |
Ø outside | 22 mm, 28 mm |
Color | Chrome |
Mounting type | Bride |
Suitable for the following models
Sachs | 504 (without pedal shaft) |
Accessories & related products
Moped fans like you also bought:
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø Stranded wire: 1.2 mm · Cable length: 2000 mm · Nipple shape: Barrel (transverse) · Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs
EUR 4.05
GPO air filter insert | Sachs 503 AB/ABL, 504 CH (A4336)
Total length: 58 mm · Width: 58 mm · Height: 62 mm · Manufacturer: GPO · Material: Paper · Area of application: Standard · Color: black · Color: white · Ø inside: 15.5 mm · Ø outside: 48.7 mm · Camouflaged: No · Pony OEM number: A4336 · Sachs OEM no.: 0225 010 100
EUR 10.50
Continental 2.00 x 19" KKS
Manufacturer: Continental · Tire width [inch]: 2 " · Color: black · Width [inch]: 2 · Tire width [mm]: 50.8 · Wheel size [inch]: 19 " · Old designation: 23 x 2 · Speed index: B = 50 km/h · Load capacity index: 24 = 90 kg · Profile type: KKS 10 · Tire type: Allround · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 59.10
Oil seal NBR 15/32/5.5 A main shaft | Sachs 504, 505, 535 (A4216)
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Ø inside: 15 mm · Ø outside: 32 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Width: 5.5 mm
EUR 10.50
BERU breaker with cable (small) | Bosch / Ducati / Minarelli
Manufacturer: BERU · Area of application: Original · Area of application: Standard · Material: Steel · Ø Internal flywheel: 80 mm · Cable available: Yes · Number of fixing points: 1 pcs · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Pony OEM number: A2496 · BOSCH OEM number: 2 207 013 005 · BOSCH OEM number: 2 207 110 007 · Morini OEM number: 29 0026 005 · Morini OEM number: 29 0034 005 · Minarelli OEM number: 82 000 16 · BERU OEM number: 0 340 100 458 · Fantic OEM number: 320 4500 5150
EUR 22.40
FAG 16101 A 2RS wheel bearing 12/30/8
Width: 8 mm · Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 8 mm · Manufacturer: FAG · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Groove ring: No · Material: Plastic · Area of application: Standard · Material: Steel · Surface: blank · Stock number: 16101 · Bearing type: Deep groove ball bearing · Ø inside: 12 mm · Ø outside: 30 mm · Ball bearing closed: Yes
EUR 17.40