Fancy saddle with red imitation leather for universal use on your moped, moped and small motorcycle.
The seatbelt can be mounted on all seat tubes with an outer diameter of 22 mm and impresses with its good workmanship.
Length: approx. 470 mm
Width: approx. 240 mm
Height: approx. 200 mm
Fastening bolts at the rear: 2x M8 x 12
Fastening bolt spacing: 100 mm
The seat clamp is already mounted and included in the scope of delivery.
The support plate for mounting on the luggage carrier is not included in the scope of delivery and must be manufactured by yourself depending on the model and brand.
Other seat mounts, seat tubes and towbars can be found in the accessories section.
NOS – New from old stock.
A quality product made in Italy.
| Width | 240 mm |
| Manufacturer | Made in Italy |
| Material | Imitation leather, Foam, Steel |
| Surface | raw, varnished |
| Color | red, black |
| Total length | 470 mm |
| Spring-loaded | No |
| Height | 200 mm |
| Number of fixing points | 3 pcs |
| Hole pattern [mm] | 100 |
Accessories & related products
HAERRY trailer coupling fifth wheel short
Material: Aluminum · Material: Steel · Total length: 160 mm · Width: 75 mm · Height: 85 mm · Thickness: 6 mm · Manufacturer: HAERRY · Ø ball: 30 mm · Wide intake: 75 mm · Hole spacing: 56 mm · Surface: galvanized (blue) · Thread type: MF8x1 (fine pitch thread) · Clamping diameter: 30 mm
EUR 77.00
Bench seat long
Manufacturer: Made in Portugal · Material: Imitation leather · Material: Steel · Ø Saddle tube holder: 22 mm · Color: black · Surface: galvanized (blue) · Surface: varnished · Width: 180 mm · Spring-loaded: No · Height: 110 mm · Height: 170 mm · Lettering: No · Total length: 520 mm · Number of fixing points: 2 pcs
EUR 82.90
HAERRY trailer coupling Attachment to seat tube long
Thickness: 6 mm · Manufacturer: HAERRY · Ø ball: 30 mm · Wide intake: 75 mm · Hole spacing: 56 mm · Material: Aluminum · Material: Steel · Surface: galvanized (blue) · Width: 75 mm · Clamping diameter: 30 mm · Height: 85 mm · Total length: 195 mm · Thread type: MF8x1 (fine pitch thread)
EUR 82.90
Explore categories from Saddle
Moped fans also bought
Nut flywheel M10x1 SW15 serrated
Material: Steel · Height: 10.5 mm · Ø outside: 19.8 mm · Surface: galvanized (blue) · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm · Drive: External hexagon · Width across flats: 15 mm · Area of application: Standard
EUR 3.45
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Hole spacing: 300 mm · Material: Aluminum · Material: Steel · Color: Chrome · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Number of fixing points: 2 pcs · Ø spars: 24 mm · Mounting type: Nuts & bolts · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Total length: 335 mm
EUR 59.20
mk-Merch license plate holder "mofakult" plastic (CH version)
Manufacturer: mofakult Merch · Hole spacing: 50 mm · Material: Plastic · Color: black · Ø mounting hole: 6 mm · Number of fixing points: 2 pcs · Number of fixing points: 9 pcs · Thread length: 6 mm · Mounting type: Nuts & bolts · Total length: 175 mm · Thread type: M5x0.8 (standard thread) · Width: 108 mm · Height: 11 mm
EUR 14.10
EUR 9.40
Handlebar fork plate 26 cm "Chopper" with chrome plate
Material: Steel · Color: Chrome · Surface: chrome-plated · Clamping diameter: 22 mm · Ø outside: 22 mm · Fork plate holder length: 85 mm · Mounting type: Fork plate · Length handlebar ends: 205 mm · Crossbar: Yes · Ø Strut: 55 mm · Width: 490 mm · Strut length: 230 mm · Height: 260 mm
EUR 47.30
GPO speedo drive 17" with lugs 12 mm axle | Puch Maxi S / N, X30 Sport NS / NL, NG-2AH, X30 Velux
Manufacturer: GPO · Ø axle: 12 mm · Material: Aluminum · Place of use: left · Place of use: right · Ø outside: 41 mm · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø mounting hole: 12 mm · Total height: 10 mm · Wheel size: 17 " · Thread type: MF10x1 (fine pitch thread)
EUR 33.10
Working late? Evening hours on Thursday until 20:00
