Forged and sealed 41 mm cylinder kit with 12 mm piston pin including gaskets and studs.
This tuning cylinder without sealing fits Puch X30 Velux and Puch X30 NG-2AH mopeds.
Please select the desired piston in the selection field.
Picture 1 shows the Meteor piston with molybdenum coating manufactured for swiing. This is characterized by its high-quality and precise workmanship.
The piston is more durable and provides minimal additional power compared to the standard piston, which can be seen in Figure 2.
Attention: On Velux engines, the small slot at the sealing surface to the cylinder base must be filled in to ensure that the cylinder kit is tight.
We recommend using the Wekem liquid metal for this purpose, which can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Hole pattern [mm]: 44 x 44 · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 60 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 41 mm · Ø cylinder neck: 43.2 mm · Ø outlet inside: 19.4 mm · Ø Inlet inside: 14.6 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning
Hole pattern [mm]: 44 x 44 mm · Manufacturer: GPO · Number of components: 4 pcs · Ø cylinder: 40 mm, 41 mm · Hole spacing inlet: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Area of application: Tuning
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Thread length: 12 mm · Strength class: 10.9
| Nominal diameter | 41 mm |
| Manufacturer | GPO, swiing, Meteor Racing |
| Material | Gray cast iron |
| Surface | sandblasted |
| Displacement | 60 ccm |
| Crankshaft stroke | 43 mm |
| Area of application | Tuning |
| Ø cylinder neck | 43.2 mm |
| Ø outlet inside | 19.4 mm |
| Ø Inlet inside | 14.6 mm |
| Ø piston pin (B) | 12 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 32 mm |
| Hole spacing outlet | 42 mm |
| Outlet type | straight |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Camouflaged | No |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
WEKEM 2K liquid metal
Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Type of application: 2K · Area of application: Chemistry · Contents [ml]: 24 ml · Color: gray · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Temperature resistance (min.): -20 - 80 °C · Alignment time: 240 sec
EUR 23.50
EUR 470.00/kg
GPO piston 41 mm (12 mm KoBo) | Puch X30 Velux, M50, MS50, VS50, DS50, VZ50
Nominal diameter: 41 mm · Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Compression height (C): 23.2 mm · Curvature (D): 3.7 mm · Total piston height (E): 49.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston weight: 85 g
EUR 59.00
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Ø outside: 15 mm · Ø inside: 12 mm · Width: 14.2 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 14.10
swiing piston 41 mm (12 mm KoBo) Racing | Puch X30 Velux fan-cooled
Surface: molybdenum-coated · Nominal diameter: 41 mm · Manufacturer: swiing · Ø outside piston (A): 40.95 mm · Compression height (C): 22.5 mm · Curvature (D): 3.5 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm · Piston weight: 94 g
EUR 82.60
Moped fans also bought
GPO piston 41 mm (12 mm KoBo) | Puch X30 Velux, M50, MS50, VS50, DS50, VZ50
Nominal diameter: 41 mm · Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Compression height (C): 23.2 mm · Curvature (D): 3.7 mm · Total piston height (E): 49.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston weight: 85 g
EUR 59.00
Hot 
swiing® ingenious 15 mm carburetor tuning camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø Internal connection: 20 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m
EUR 94.40
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Number of components: 4 pcs · Area of application: Tuning · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 38 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 10.50
GPO 15 mm intake manifold | Puch ZA50
Manufacturer: GPO · Mounting type: Screws · Number of fixing points: 2 pcs · Material: Aluminum · Camouflaged: No · Ø inside: 15 mm · Ø External connection: 20 mm · Total height: 63 mm · Total length: 51.5 mm · Area of application: Tuning · Height flange center hole: 52.5 mm · Hole spacing inlet: 32 - 38 mm
EUR 46.70
Not in stock
swiing piston 41 mm (12 mm KoBo) Racing | Puch X30 Velux fan-cooled
Surface: molybdenum-coated · Nominal diameter: 41 mm · Manufacturer: swiing · Ø outside piston (A): 40.95 mm · Compression height (C): 22.5 mm · Curvature (D): 3.5 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm · Piston weight: 94 g
EUR 82.60
GPO secondary nozzle PHBG (size 30 - 62.5) of your choice
Manufacturer: GPO · Material: Brass · Component group Carburetor: Spraying · Total length: 9.5 mm · Carburetor type: PHBG · Carburetor type: PHBG AD · Carburetor type: PHBG AS · Carburetor type: PHBG BD · Carburetor type: PHBG CS · Carburetor type: PHBG DS · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 32 · Nozzle size: 35 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 40 · Nozzle size: 42 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 62.5
EUR 4.15
Collection only possible with online purchase and appointment.
