Racing kit with 45 mm diameter for your Tomos moped / moped with A35 engine.
This 70 cc racing cylinder made of aluminum with Nikasil coating has every last millimeter of common sense taken out of it to make you and your Tomos the king of the racetrack.
In order to get the full power out of the tuning cylinder, a racing exhaust and a carburettor with plenty of oomph should be fitted.
All necessary gaskets, piston pins, piston rings and circlips are included in the scope of delivery.
You can find the necessary racing equipment and other engine kits in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Nominal diameter | 45 mm |
| Manufacturer | GPO |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 70 ccm |
| Ø cylinder neck | 47.7 mm |
| Ø outlet inside | 22.9 mm |
| Inlet window | 29.8 x 36.7 |
| Ø piston pin (B) | 12 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 36 mm, 39 mm |
| Number of fixing points | 4 pcs |
| Outlet type | slanted |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | No |
| Camouflaged | No |
| Area of application | Tuning |
| Tomos |
Ratings
Accessories & related products
Airsal 44 mm cylinder kit tuning 12 mm KoBo | Tomos A35
Nominal diameter: 44 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Ø cylinder neck: 47.4 mm · Ø outlet inside: 22 mm · Ø piston pin (B): 12 mm · Inlet window: 29.5 x 37.5 · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31.5 mm · Hole spacing inlet: 36 mm · Hole spacing inlet: 39 mm · Number of fixing points: 4 pcs · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 142.10
Airsal 44 mm cylinder kit tuning 10 mm KoBo | Tomos A35
Nominal diameter: 44 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Ø cylinder neck: 47.4 mm · Ø outlet inside: 22 mm · Ø piston pin (B): 10 mm · Inlet window: 29.5 x 37.5 · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31.5 mm · Hole spacing inlet: 36 mm · Hole spacing inlet: 39 mm · Number of fixing points: 4 pcs · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 142.10
GPO gasket set 45 mm cylinder & diaphragm | Tomos A3, A35
Manufacturer: GPO · Material: Aluminum · Material: Composite materials · Material: Oiled paper · Number of components: 5 pcs · Ø cylinder: 45 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm / 39 x 36/32 mm · Decompressor: Yes · Area of application: Tuning
EUR 11.70
GPO 44 mm cylinder kit tuning 12 mm KoBo | Tomos A35
Nominal diameter: 44 mm · Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 22.8 mm · Inlet window: 35.5 x 29.5 · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 36 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 95.90
EUR 106.50
Parmakit 45 mm cylinder kit tuning 12 mm KoBo | Tomos A35
Nominal diameter: 45 mm · Manufacturer: Parmakit · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Thread inlet: M5x0.8 (standard thread) · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 296.10
Piston 45 mm (12 mm KoBo) | Tomos A3 / A35
Nominal diameter: 45 mm · Ø outside piston (A): 44.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22 mm · Curvature (D): 4 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Weight piston kit: 91 g
EUR 41.40
Moped fans also bought
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Bulb holder: BA15d · Color: Chrome · Color: black · Surface: chrome-plated · Color: transparent · Surface: varnished · Housing material: Metal · Switch included: No · Thread size: M6 · Lens material: Plastic · Width: 134 mm · Height: 147 mm · Mounting type: Screws · Test mark: none · Ø outside: 130 mm · Speedometer recording: None · Battery operated: No · Number of fixing points: 2 pcs · Depth: 80 mm · Area of application: Standard
EUR 29.50
NTN 6203 C3 Ball bearing 17/40/12
Bearing cage: Sheet steel cage ball-guided · Stock number: 6203 · Inner ring width: 12 mm · Manufacturer: NTN · Bearing clearance: C3 · Groove ring: No · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Width: 12 mm · Ø inside: 17 mm · Ø outside: 40 mm · Ball bearing closed: No · Area of application: Standard
EUR 10.50
GPO mushroom air filter grille chrome 28 - 32 mm
Manufacturer: GPO · Material: Metal · Material: Rubber · Color: Chrome · Color: black · Filter type: Grille · Length rubber part: 65 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Length of filter section: 50 mm · Ø outside: 61 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Total length: 115 mm · Camouflaged: No · Area of application: Tuning
EUR 15.30
Not in stock
Dell'Orto 15/15 SHA carburetor hand choke (with air filter)
Nominal diameter: 15 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA · Width: 70 mm · Choke control: Hand choke · Height: 100 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Ø without reducing sleeve: 21 mm · Nozzle size: 68 · Ø Inside entrance: 15 mm · Ø Internal connection: 18 mm · Total length: 82 mm · Ø Output inside: 15 mm · Ø Air filter connection: 59 mm · Mixed oil connection: No · Vacuum connection: No · Camouflaged: No · Area of application: Racing · Area of application: Tuning
EUR 82.80
Handlebar fork plate 13 cm Cross black
Material: Steel · Color: black · Surface: varnished · Width: 665 mm · Clamping diameter: 22 mm · Height: 130 mm · Fork plate holder length: 100 mm · Mounting type: Fork plate · Ø outside: 22 mm · Length handlebar ends: 180 mm · Crossbar: Yes · Ø Strut: 12.5 mm · Strut length: 230 mm
EUR 29.50
Not in stock
Collection only possible with online purchase and appointment.
