Hot 
The legend is back—and bigger than ever! The legendary Metrakit racing cylinder from days gone by has risen like a phoenix from the ashes in its 45 mm version, reigniting the passion in your Puch Maxi S, N, X30 Sport NS, NL, and Supermaxi LG1 and LG2 mopeds.
The aluminum cylinder with a gray cast iron liner is an optimized replica of the original Metrakit racing cylinder. The valve timing has been revised compared to the original and features more exhaust advance, making the well-known piston seizure problem caused by high heat generation a thing of the past. In addition, the cylinder height has been precisely adjusted, so that the extra-thick base gasket previously required is now unnecessary.
This GPO racing cylinder is among the strongest and most powerful in its class and has been extensively tested. It delivers robust torque across the entire power band and offers impressively powerful performance. Thanks to the optimizations compared to the original, the cylinder also achieves a noticeably higher RPM, which provides even more power and riding enjoyment.
To get the most out of this tuned cylinder, we recommend using at least a 15-mm carburetor. However, you’ll achieve noticeably more power with a 17-mm carburetor. Thanks to the generous 19-mm intake, you’ll have plenty of headroom for optimal power delivery.
Note: The cylinder is shipped loose and without a piston, gasket set, studs, or other mounting parts.
A high-quality, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Camouflaged | No |
| Material | Aluminum, Gray cast iron |
| Surface | varnished |
| Displacement | 70 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 45 mm |
| Ø cylinder neck | 47.8 mm |
| Ø outlet inside | 26 mm |
| Ø Inlet inside | 19 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing outlet | 42 mm |
| Area of application | Tuning, Racing |
| Hole spacing inlet | 38 mm |
| Ø piston pin (B) | 12 mm |
| Hole pattern [mm] | 44 x 44 |
| Outlet type | straight |
| Thread outlet | M6x1 (standard thread) |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
- 16 %
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9
EUR 2.15
EUR 1.80
swiing® ingenious 15 mm carburetor set camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Area of application: Tuning · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Ø Air filter connection: 20 mm · Hole spacing inlet: 38 mm · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 124.50
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Ø outside: 70 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 730 mm · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Cigar · Flame tube attachment: Flange
EUR 142.30
GPO 45 mm piston (Metrakit replica) | Puch
Nominal diameter: 45 mm · Manufacturer: GPO · Material: Aluminum · Ø outside piston (A): 44.93 mm · Compression height (C): 23.25 mm · Curvature (D): 2.85 mm · Total piston height (E): 49.6 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.55 mm · Piston ring height: 2 mm · Thick piston ring: 1.8 mm · Thick piston ring: 1.9 mm · Ø piston pin (B): 12 mm · Weight piston kit: 98 g
EUR 59.20
GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Graphite / Graphite · Material: Sealing carton · Ø cylinder: 43.5 mm · Ø cylinder: 45 mm · Ø outlet inside: 26.5 mm · Hole spacing inlet: 38 mm · Number of components: 4 pcs · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 2.6 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 X 44
EUR 17.70
GPO 43.5 mm cylinder kit (Metrakit replica) | Puch
Nominal diameter: 43.5 mm · Manufacturer: GPO · Material: Aluminum · Material: Gray cast iron · Surface: varnished · Displacement: 64 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Racing · Area of application: Tuning
EUR 171.90
Hot
GPO 21 mm intake manifold Dell'Orto PHBG | Puch E50 / Z50 / ZA50 (wind cooled) / ZA50 (Cat.)
Manufacturer: GPO · Material: Aluminum · Ø External connection: 26 mm · Mounting type: Stud bolts & nuts · Ø inside: 21 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Total length: 85.5 mm · Total height: 68.6 mm · Area of application: Racing · Area of application: Tuning
EUR 40.90
Metrakit Air Filter, 37/32 mm, Straight, for Dell'Orto PHBG Carburetor
Manufacturer: Metracite · Material: Aluminum · Material: Rubber · Color: black · Color: red · Total length: 55 mm · Filter type: Foam · Length rubber part: 15 mm · Ø Internal connection: 32 mm · Ø Internal connection: 37 mm · Length of filter section: 22 mm · Ø outside: 81 mm · Mounting type: Bride · Camouflaged: No · Area of application: Racing
EUR 44.50
Explore categories from Cylinder
Moped fans also bought
- 16 %
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9
EUR 2.15
EUR 1.80
GPO 45 mm cylinder head tuning black | Puch Maxi S, N, X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: varnished · Ø cylinder: 45 mm · Camouflaged: Yes · Area of application: Tuning · Number of fixing points: 4 pcs · Decompressor: No · Width: 125 mm · Total length: 135 mm · Height: 55 mm
EUR 50.90
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Width: 47 mm · Choke control: Hand choke · Height: 89 mm · Height: 109 mm · Total length: 65 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Area of application: Tuning · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 142.30
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Material: Aluminum · Ø inside: 17 mm · Ø External connection: 23 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 2 pcs · Total height: 53.5 mm · Height flange center hole: 42 mm · Total length: 38 mm
EUR 53.30
GPO 45 mm piston (Metrakit replica) | Puch
Nominal diameter: 45 mm · Manufacturer: GPO · Material: Aluminum · Ø outside piston (A): 44.93 mm · Compression height (C): 23.25 mm · Curvature (D): 2.85 mm · Total piston height (E): 49.6 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.55 mm · Piston ring height: 2 mm · Thick piston ring: 1.8 mm · Thick piston ring: 1.9 mm · Ø piston pin (B): 12 mm · Weight piston kit: 98 g
EUR 59.20
GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Graphite / Graphite · Material: Sealing carton · Ø cylinder: 43.5 mm · Ø cylinder: 45 mm · Ø outlet inside: 26.5 mm · Hole spacing inlet: 38 mm · Number of components: 4 pcs · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 2.6 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 X 44
EUR 17.70
AKOA 45 mm cylinder head black | Puch E50 / ZA50 (wind cooled) / ZA50 (cat.) / Z50
Manufacturer: AKOA · Material: Aluminum · Camouflaged: No · Width: 123.2 mm · Height: 54.5 mm · Surface: varnished · Ø cylinder: 45 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Decompressor: No · Total length: 132.2 mm · Hole pattern [mm]: 44 x 44
EUR 53.30
Working late? Evening hours on Thursday until 20:00
