Original reproduction air filter for your Puch Maxi S / N moped / moped with standard Bing or swiing® SRE carburetor.
The complete air filter box is supplied pre-assembled. As usual from the factory, it has already been carefully sealed by hand with a silicone joint around the seam to minimize the risk of air leakage and make it easier to adjust the carburettor.
The complete air filter set includes the two housings, the mounting brackets, the air filter hose, the two air filter plugs and the original filter screen installed in the air filter.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Area of application | Original, Standard |
| Color | black |
| Filter type | Standard sieve |
| Ø Internal connection | 20 mm |
| Mounting type | Plug connection clamped |
| Puch | E50 |
Accessories & related products
Elring Dirko HT sealing compound black (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Color: black · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 23.50
EUR 335.71/l
Moped fans also bought
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Area of application: Standard · Ø cylinder: 38 mm · Candle thread: short · Height: 55 mm · Total length: 135 mm · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Width: 125 mm · Decompressor: No
EUR 38.90
Exhaust 22 mm 2-piece replica (with number) | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 58 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Total length: 920 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange
EUR 76.70
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Standard · Nominal diameter: 12 mm · Carburetor type: SRE · Color: gray · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 52 · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Height: 108 mm · Total length: 65 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Width: 50 mm · Nozzle block: 2.15 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
EUR 82.60
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Original · Hole spacing inlet: 38 mm · Total length: 45.5 mm · Ø inside: 12 mm · Height flange center hole: 43 mm · Mounting type: Screws · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Camouflaged: No · Total height: 53 mm
EUR 41.20
Hot 
swiing® revival 38 mm cylinder kit 1.6 hp CH12 "Original" | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 48 mm · Ø Inlet inside: 9 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 19 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Standard · Decompressor: Yes · Camouflaged: Yes · Alternative version of the Puch OEM number: 349.7.10.105.0
EUR 124.00
swiing® revival nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Quantity: 11 pcs · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Total length: 6 mm
EUR 25.90
swiing® revival 50 ccm 1.6 hp cylinder set original look | Puch E50
Manufacturer: GPO · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Nominal diameter: 38 mm · Outlet type: straight · Number of fixing points: 4 pcs · Decompressor: No
EUR 372.10
EUR 413.50
Collection only possible with online purchase and appointment.
