
Original reproduction air filter for your Puch Supermaxi LG1, LG2 moped / moped with catalytic converter.
The air filter box is supplied in disassembled condition.
To make assembly easier, we recommend briefly placing the air filter housing in warm water to soften the plastic.
Manufacturer: GPO · Camouflaged: Yes · Color: black · Material: Plastic · Filter type: Box · Ø Internal connection: 20 mm, 28 mm · Mounting type: Plug connection clamped · Area of application: Tuning
| Manufacturer | GPO |
| Camouflaged | Yes |
| Color | black |
| Material | Plastic |
| Area of application | Standard, Tuning |
| Filter type | Standard sieve, Racing screen, Foam |
| Mounting type | Plug connection clamped |
| Ø Internal connection | 28 mm |
| Puch |
Accessories & related products
swiing® revival nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
EUR 18.90
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Material: Silicone · Contents: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Area of application: Chemistry · Gap dimension (max.): 2 mm
EUR 23.60
EUR 337.14/l
Explore categories from Carburetor & intake system
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Surface: galvanized (blue) · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Area of application: Standard
EUR 2.85
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Thread type: M5x0.8 (standard thread) · Color: silver · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 15.30
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Mounting type: Plug connection clamped · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Choke control: Hand choke · Carburetor type: SRE · Ø fuel hose connection: 5 mm · Height: 89 mm · Height: 109 mm · Total length: 65 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Width: 47 mm · Ø Internal connection: 23 mm · Mixed oil connection: No · Vacuum connection: No · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 142.30
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Material: Aluminum · Camouflaged: Yes · Ø inside: 17 mm · Ø External connection: 23 mm · Hole spacing inlet: 38 mm · Total height: 53.5 mm · Height flange center hole: 42 mm · Total length: 38 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 53.30







