22 mm replica exhaust suitable for Puch Maxi S & N, Puch X30 Sport NS / NL, and Supermaxi LG1 / LG2 mopeds (if a Puch Maxi cylinder is installed).
The exhaust is a two-piece, bolted-together unit with the corresponding Puch part number and stamped logo.
The M7 screw at the end of the flame tube must be secured with an additional lock nut; otherwise, the nut may come loose and the silencer insert may fall out.
We also recommend replacing the installed gasket between the flame tube and the muffler. You can find a high-quality replacement in the accessories section.
Note: Replica exhaust systems may be slightly louder than the originals. You can remedy this by wrapping sound-deadening wool around the muffler. You’ll find this, among other items, in the accessories section.
Original Puch part number: 349.1.16.000.2
Brand-name product from the Portuguese manufacturer Jamarcol.
| Manufacturer | Jamarcol |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Mounting type | Welded lug, Stud bolts & nuts |
| Number of fixing points | 4 pcs |
| Ø outside | 59 mm |
| Ø Flame tube outside | 22 mm |
| Exhaust type | Flute |
| Flame tube attachment | Flange |
| Total length | 920 mm |
| Puch | E50 |
Accessories & related products
Stop nut M7 galvanized
Height: 7.3 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Nut type: Self-securing nut · Nominal diameter (thread): 7 mm · Drive: External hexagon · Width across flats: 11 mm · Thread depth: 4.8 mm · Strength class: 8 · Area of application: Standard
EUR 1.05
Stop nut M7 Inox
Material: Chrome steel (colloquially known as stainless steel) · Nut type: Self-securing nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Nominal diameter (thread): 4 mm · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 7 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm
EUR 0.85
Explore categories from Exhaust system
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.80
Stop nut M7 galvanized
Height: 7.3 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Nut type: Self-securing nut · Nominal diameter (thread): 7 mm · Drive: External hexagon · Width across flats: 11 mm · Thread depth: 4.8 mm · Strength class: 8 · Area of application: Standard
EUR 1.05
Working late? Evening hours on Thursday until 20:00
