Puch pinion & sprocket

Here you will find drive sprockets and gear rims, as well as drive chains and the matching chain lock from the quality brands Wippermann, KMC, GPO and Esjot for your Puch 2-speed manual Z50 engine with blower or wind cooling, as well as for the 1- or 2-speed automatic E50, E50A or ZA50 engine. These single and two-speed engines with manual or automatic shifting were installed in Puch Maxi N, S / Puch Supermaxi LG1, LG2 / Puch X30 Velux / Puch X30 NS, NL / Puch X30 NG-2AH mopeds. To shorten the chains with the standard 415, 415H or 420 pitch, we also offer the appropriate chain cutters.

For: Puch

25674

Locking plate pinion | Puch X30 Velux

Number of lobes: 2 pcs · Ø inside: 12.7 mm · Thickness: 1 mm · Width: 6 mm · Width 2: 9 mm

EUR 7.60

ESJOT sprocket 34 teeth coaster brake galvanized

For: Puch · Sachs · Zündapp Belmondo · Cilo

18340

ESJOT sprocket 34 teeth coaster brake galvanized

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Thickness: 4.1 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 94 mm · Surface: galvanized (blue) · Number of teeth: 34 pcs · Ø mounting hole: 6.4 mm · Number of fixing points: 4 pcs · Ø bolt circle: 105.5 mm · Hole spacing: 74 mm

EUR 56.80

ESJOT sprocket 47 teeth galvanized | Puch Maxi, X30 NG-2AH

For: Puch

19229

ESJOT sprocket 47 teeth galvanized | Puch Maxi, X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 94 mm · Surface: galvanized (blue) · Number of teeth: 47 pcs · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm

EUR 41.40

ESJOT sprocket 40 teeth coaster brake galvanized

For: Puch · Sachs · Zündapp Belmondo · Cilo

19698

ESJOT sprocket 40 teeth coaster brake galvanized

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Thickness: 4.2 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 94 mm · Surface: galvanized (blue) · Number of teeth: 40 pcs · Ø mounting hole: 6.5 mm · Number of fixing points: 4 pcs · Ø bolt circle: 105.5 mm · Hole spacing: 74 mm

EUR 59.20

GPO sprocket 42 teeth chrome | Puch Maxi, X30 NG-2AH

For: Puch

18822

GPO sprocket 42 teeth chrome | Puch Maxi, X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: silver · Ø inside: 94.3 mm · Surface: chrome-plated · Number of teeth: 42 pcs · Ø mounting hole: 6.6 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Ø bolt circle: 106 mm · Hole spacing: 36.5 mm

EUR 59.20

GPO sprocket 48 teeth chrome | Puch Maxi, X30 NG-2AH

For: Puch

18823

GPO sprocket 48 teeth chrome | Puch Maxi, X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: silver · Ø inside: 94 mm · Surface: chrome-plated · Number of teeth: 48 pcs · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Ø bolt circle: 106 mm · Hole spacing: 36.5 mm

EUR 59.20

ESJOT sprocket 52 teeth galvanized | Puch Maxi, X30 NG-2AH

For: Puch

19231

ESJOT sprocket 52 teeth galvanized | Puch Maxi, X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 94 mm · Surface: galvanized (blue) · Number of teeth: 52 pcs · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Ø bolt circle: 106 mm · Hole spacing: 36.5 mm

EUR 47.30

ESJOT sprocket 43 teeth galvanized | Puch Maxi, X30 NG-2AH

For: Puch

19228

ESJOT sprocket 43 teeth galvanized | Puch Maxi, X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 94 mm · Surface: galvanized (blue) · Number of teeth: 43 pcs · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Ø bolt circle: 106 mm · Hole spacing: 36.5 mm

EUR 41.40

KMC drive chain green 415H (reinforced) 128L

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Tomos · Bye Bike

20553

KMC drive chain green 415H (reinforced) 128L

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Color: green · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Surface: varnished

EUR 27.20

GPO sprocket 38 teeth chrome | Puch Maxi, X30 NG-2AH

For: Puch

18821

GPO sprocket 38 teeth chrome | Puch Maxi, X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: silver · Ø inside: 94 mm · Surface: chrome-plated · Number of teeth: 38 pcs · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Ø bolt circle: 106 mm · Hole spacing: 36.5 mm

EUR 59.20

GPO sprocket 46 teeth black | Puch Maxi, Puch X30 NG-2AH

For: Puch

26663

GPO sprocket 46 teeth black | Puch Maxi, Puch X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Ø inside: 94 mm · Color: black · Ø mounting hole: 6.5 mm · Number of teeth: 46 pcs · Cranking (offset): 8 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Ø bolt circle: 106 mm · Number of fixing points: 6 pcs

EUR 29.50

ESJOT sprocket 45 teeth coaster brake galvanized

For: Puch · Sachs · Zündapp Belmondo · Cilo

19875

ESJOT sprocket 45 teeth coaster brake galvanized

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Ø inside: 94 mm · Color: silver · Ø mounting hole: 6.4 mm · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs

EUR 65.20

ESJOT sprocket 40 teeth galvanized | Puch Maxi, X30 NG-2AH

For: Puch

22257

ESJOT sprocket 40 teeth galvanized | Puch Maxi, X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Ø inside: 94 mm · Color: silver · Ø mounting hole: 6.7 mm · Number of teeth: 40 pcs · Cranking (offset): 8 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Ø bolt circle: 106 mm · Number of fixing points: 6 pcs

EUR 41.40

ESJOT spider 40 teeth (4/5/6 hole) Ø 98 mm cranked galvanized

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512)

33472

ESJOT spider 40 teeth (4/5/6 hole) Ø 98 mm cranked galvanized

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Ø inside: 98 mm · Color: silver · Ø mounting hole: 6.6 mm · Number of teeth: 40 pcs · Thickness: 4.5 mm · Cranking (offset): 10 mm · Ø bolt circle: 115 mm · Number of fixing points: 4 pcs · Number of fixing points: 5 pcs · Number of fixing points: 6 pcs

EUR 41.40

Inox

For: Puch · Sachs · Zündapp Belmondo · Cilo

19513

swiing® revival lock washer sprocket mounting coaster wheel Inox

Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Number of lobes: 2 pcs

EUR 3.45

swiing® ingenious special nut M6 x 10 SW8 sprocket back kick galvanized

For: Puch · Sachs · Zündapp Belmondo · Cilo

26610

swiing® ingenious special nut M6 x 10 SW8 sprocket back kick galvanized

Manufacturer: swiing® ingenious parts · Material: Steel · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Height: 12 mm · Drive: External hexagon · Surface: galvanized (blue) · Width across flats: 8 mm · Width across flats: 10 mm

EUR 5.80

GPO pinion 16 teeth rubber pad white | Puch

For: Puch

31446

GPO pinion 16 teeth rubber pad white | Puch

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Plastic · Material: Steel · Recording type: Interlocking · Surface: sandblasted · Number of teeth: 16 pcs · Total thickness: 16 mm

EUR 22.40

GPO sprocket 45 teeth 4-hole Grimeca/Snowflake rim

For: Puch · Sachs

19187

GPO sprocket 45 teeth 4-hole Grimeca/Snowflake rim

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: silver · Ø inside: 98 mm · Surface: galvanized (blue) · Number of teeth: 45 pcs · Cranking (offset): 9 mm · Number of fixing points: 4 pcs · Ø bolt circle: 115 mm

EUR 52.10

ESJOT sprocket backpedal 50 teeth black | Puch / Sachs / Zündapp

For: Puch · Sachs · Zündapp Belmondo · Cilo

32820

ESJOT sprocket backpedal 50 teeth black | Puch / Sachs / Zündapp

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Thickness: 4.4 mm · Manufacturer: ESJOT · Material: Steel · Color: black · Ø inside: 94 mm · Surface: varnished · Number of teeth: 50 pcs · Ø mounting hole: 6.4 mm · Number of fixing points: 4 pcs · Ø bolt circle: 105.5 mm

EUR 77.00

KMC drive chain yellow 415H (reinforced) 128L

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Tomos · Bye Bike

25446

KMC drive chain yellow 415H (reinforced) 128L

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Color: yellow · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Surface: varnished

EUR 30.70

KMC drive chain orange 415H (reinforced) 128L

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Tomos · Bye Bike

25445

KMC drive chain orange 415H (reinforced) 128L

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Color: orange · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Surface: varnished

EUR 30.70

ESJOT sprocket 45 teeth galvanized Grimeca (5-hole)

For: Puch · Sachs

22825

ESJOT sprocket 45 teeth galvanized Grimeca (5-hole)

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 98 mm · Surface: galvanized (blue) · Number of teeth: 45 pcs · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm · Number of fixing points: 5 pcs · Ø bolt circle: 115 mm

EUR 47.30

ESJOT sprocket 38 teeth galvanized | Puch Maxi, X30 NG-2AH

For: Puch

23539

ESJOT sprocket 38 teeth galvanized | Puch Maxi, X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 94 mm · Surface: galvanized (blue) · Number of teeth: 38 pcs · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Ø bolt circle: 106 mm · Hole spacing: 36.5 mm

EUR 41.40

ESJOT sprocket 41 teeth galvanized | Puch Maxi, X30 NG-2AH

For: Puch

24141

ESJOT sprocket 41 teeth galvanized | Puch Maxi, X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 94 mm · Surface: galvanized (blue) · Number of teeth: 41 pcs · Ø mounting hole: 6.7 mm · Number of fixing points: 6 pcs · Ø bolt circle: 106 mm

EUR 41.40

ESJOT sprocket 37 teeth black | Puch X30 Chopper

For: Puch

23927

ESJOT sprocket 37 teeth black | Puch X30 Chopper

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: black · Ø inside: 38 mm · Surface: varnished · Number of teeth: 37 pcs · Ø mounting hole: 8.4 mm · Number of fixing points: 6 pcs · Number of fixing points: 12 pcs · Ø bolt circle: 71 mm · Ø bolt circle: 84 mm

EUR 50.90

ESJOT sprocket 40 teeth galvanized | Puch X30 Chopper

For: Puch

23928

ESJOT sprocket 40 teeth galvanized | Puch X30 Chopper

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 38 mm · Surface: galvanized (blue) · Number of teeth: 40 pcs · Ø mounting hole: 8.4 mm · Number of fixing points: 6 pcs · Number of fixing points: 12 pcs · Ø bolt circle: 71 mm · Ø bolt circle: 84 mm

EUR 50.90

ESJOT sprocket 45 teeth galvanized | Puch X30 Chopper

For: Puch

23929

ESJOT sprocket 45 teeth galvanized | Puch X30 Chopper

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 38 mm · Surface: galvanized (blue) · Number of teeth: 45 pcs · Ø mounting hole: 8.4 mm · Number of fixing points: 6 pcs · Number of fixing points: 12 pcs · Ø bolt circle: 71 mm · Ø bolt circle: 84 mm

EUR 52.10

ESJOT sprocket 47 teeth black | Puch X30 Chopper

For: Puch

23930

ESJOT sprocket 47 teeth black | Puch X30 Chopper

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: black · Ø inside: 38 mm · Surface: varnished · Number of teeth: 47 pcs · Ø mounting hole: 8.4 mm · Number of fixing points: 6 pcs · Number of fixing points: 12 pcs · Ø bolt circle: 71 mm · Ø bolt circle: 84 mm

EUR 52.10

ESJOT sprocket 42 teeth galvanized | Puch Maxi, X30 NG-2AH

For: Puch

22258

ESJOT sprocket 42 teeth galvanized | Puch Maxi, X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 94 mm · Surface: galvanized (blue) · Number of teeth: 42 pcs · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Ø bolt circle: 106 mm · Hole spacing: 36.5 mm

EUR 41.40

ESJOT sprocket 32 teeth (welded) | Sachs HR90 hub

For: Puch · Sachs · Zündapp Belmondo · Cilo

22291

ESJOT sprocket 32 teeth (welded) | Sachs HR90 hub

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Thickness: 4.1 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Ø inside: 90 mm · Surface: galvanized (blue) · Number of teeth: 32 pcs · Ø bolt circle: 107 mm

EUR 58.00

Page 1 of 6

Our favorite manufacturers

All