Aluminum cover plate for the reed valve inlet of the 47 mm Gilardoni italkit Puch cylinder kit.
The reed valve cover is used to close the reed valve system and convert the cylinder kit to a housing inlet (GME).
Outer dimensions: 72.5 x 48 mm
Hole pattern: 60 x 35 mm
Material thickness: 8 mm
Material: aluminum
You can find corresponding additional material such as seals, sealing compound etc. in the accessories section.
| Thickness | 8 mm |
| Manufacturer | MBR |
| Material | Aluminum |
| Area of application | Tuning |
| Width | 48 mm |
| Total length | 72.5 mm |
| Mounting type | Screws |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 60 x 35 mm |
| Puch |
Accessories & related products
Gilardoni italkit 47 mm Cylinder Kit (without head) | Puch E50 / Z50 / ZA50
Manufacturer: Gilardoni italkit · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 51 mm · Number of fixing points: 4 pcs · Nominal diameter: 47 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 249.00
Not in stock
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Manufacturer: Elring · Color: red · Contents: 70 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 300 °C
EUR 27.20
EUR 388.57/l
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 11.80
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Total length: 18 mm · Thread length: 12 mm · Puch OEM number: 901.1053
EUR 4.15
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Ø outside: 5 mm · Number of components: 2 pcs · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
EUR 2.35
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Area of application: Motor bracket · Color: red · Color: white · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Width: 245 mm · Height: 340 mm · Hole spacing: 21.5 mm · Total length: 370 mm · Material thickness: 3.5 mm
EUR 88.90
Hot
swiing® ingenious Cable-Pull Starter for MVT Ignition | Puch E50
Ø outside: 130 mm · Width: 150 mm · Height: 82 mm · Manufacturer: swiing® ingenious parts · Hole spacing: 138 mm · Material: Plastic · Material: Steel · Color: Chrome · Color: black-matt · Surface: chrome-plated · Surface: raw · Ignition system: MVT Allumage · Number of fixing points: 2 pcs · Total length: 170 mm
EUR 177.90
Working late? Evening hours on Thursday until 20:00
