Steel cover plate for the reed valve inlet of the 47 mm Gilardoni italkit Puch cylinder kit.
The reed valve cover is used to close the reed valve system in order to convert the cylinder kit to a housing inlet (GME).
Outer dimensions: 72.5 x 48 mm
Hole pattern: 60 x 35 mm
Material thickness: 5 mm
Material: steel
You can find corresponding additional material such as seals, sealing compound etc. in the accessories section.
| Width | 48 mm |
| Manufacturer | MBR |
| Material | Steel |
| Surface | raw |
| Total length | 72.5 mm |
| Thickness | 5 mm |
| Mounting type | Screws |
| Ø mounting hole | 6.3 mm |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
| Hole pattern [mm] | 60 x 35 mm |
| Puch |
Accessories & related products
Gilardoni italkit 47 mm Cylinder Kit (without head) | Puch E50 / Z50 / ZA50
Manufacturer: Gilardoni italkit · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Displacement: 75 ccm · Hole spacing inlet: 35.5 mm · Ø cylinder neck: 51 mm · Hole spacing inlet: 60 mm · Camouflaged: No · Number of fixing points: 4 pcs · Ø Inlet inside: 18.3 mm · Ø outlet inside: 26.5 mm · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
EUR 249.00
Not in stock
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Contents: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Gap dimension (max.): 2 mm
EUR 27.20
EUR 388.57/l
Explore categories from Carburetor & intake system
Moped fans also bought
Stage6 8-folding diaphragm by Moto Tassinari (Gilardoni italkit)
Manufacturer: Stage6 · Material: Plastic · Surface: raw · Number of flaps: 8 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Ø mounting hole: 6.6 mm · Hole pattern [mm]: 60 x 34.8 mm · Total length: 77 mm · Width: 49 mm · Area of application: High End
EUR 136.30
Not in stock
Stage6 R/T RT-PWK 21 mm carburetor "Black-Edition"
Nominal diameter: 21 mm · Manufacturer: Stage6 R/T · Component group Carburetor: Carburetor complete · Surface: varnished · Color: black · Carburetor type: RT-PWK · Mounting type: Flange · Mounting type: Plug connection · Area of application: Tuning · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread)
EUR 198.00
Not in stock
Wössner (MBR) Piston 46.94 mm Gilardoni italkit GME | Puch
Manufacturer: MBR · Manufacturer: Wössner · Surface: molybdenum-coated · Nominal diameter: 47 mm · Ø outside piston (A): 46.94 mm · Compression height (C): 21.5 mm · Curvature (D): 2.63 mm · Total piston height (E): 48.15 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1 mm · Weight piston kit: 97 g
EUR 141.10
Working late? Evening hours on Thursday until 20:00
