Special RC101410 needle bearing suitable for mopeds / mopeds with Sachs ABL automatic engines, which are equipped with the old generation clutch basket (up to engine number 9'504'769).
Note: The freewheel hub with the dimensions 15.88/22.22/15.8, often referred to as Torrington, is fitted with the lettering facing inwards so that it is not visible when pressed in.
The bearing sleeves for newer clutch kits (from engine number 9'504'770) can be found in the accessories section.
Quality product from the Japanese manufacturer NSK.
| Ø outside | 22.22 mm |
| Manufacturer | NSK |
| Stock number | RC101410 |
| Ø inside | 15.88 mm |
| Height | 15.8 mm |
| Sachs | 503 - ABL |
Ratings
Accessories & related products
Hot 
3-plate clutch | Sachs 503, 50/2 (502), 50/3, 50/4
Manufacturer: Made in Europe · Material: Composite materials · Material: Steel · Ø inside: 29.6 mm · Ø inside: 35.3 mm · Recording type: Interlocking · Number of springs: 9 pcs · Ø outside: 110.5 mm · Area of application: Tuning · Number of slats: 3 pcs · Thickness: 3.8 mm
EUR 478.30
Not in stock
Disk 19/26/0.3 Clutch | Sachs 503 AB, ABL (A5617)
Ø inside: 19.1 mm · Nominal diameter inside: 19 mm · Thickness: 0.3 mm · Tolerance: DIN 988 (-0.03 mm) · Manufacturer: Sachs · Material: Spring steel · Surface: Hardened · Ø outside: 26 mm · Pony OEM number: A5617 · Sachs OEM no.: 0244 171 003
EUR 3.35
Not in stock
Explore categories from Gearbox & housing (motor)
Moped fans also bought
AKOA 38 mm cylinder head for decovalve | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Area of application: Tuning · Ø cylinder: 38 mm · Height: 29 mm · Ø outside: 84 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5 · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 69.10
AKOA 38 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Area of application: Tuning · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped · Decompressor: No · Camouflaged: No
EUR 207.40
AKOA 38 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 38 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 242.00
Collection only possible with online purchase and appointment.
