Rear wheel hub for Puch spoked wheels.
Fits Puch Maxi and X30 Sport NG-2A spoked wheels.
With pressed-in ball bearings.
Reproduction product, which is not comparable in quality to the original Puch rims.
Attention: The sprocket should always be glued to the hub with Loctite, as the threaded mounts are sometimes a little tight in diameter.
In addition, only Esjot freewheels should be used.
Good reproduction product from the Asian market.
| Manufacturer | Quenching |
| Color | gray |
| Puch |
Ratings
Accessories & related products
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Ø outside: 11.8 mm · Width across flats: 19 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm
EUR 17.80
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Color: blue · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.20
EUR 2’620.00/l
ESJOT freewheel 16 - 23 teeth (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: Hardened · Color: silver · Chain pitch: 1/2" x 1/8" · Number of teeth: 16 pcs · Number of teeth: 18 pcs · Number of teeth: 20 pcs · Number of teeth: 23 pcs · Thickness: 15 mm · Thread type: FG34.8 (1.37" 24G)
EUR 17.80
Explore categories from Hub & axle
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Total length: 145 mm · Color: silver · Material: Chrome steel (colloquially known as stainless steel) · Mounting type: Nuts & bolts · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 13.00
Not in stock
swiing® revival wheel axle set M11 x 180 spoke rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Total length: 180 mm · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Shank length: 30 mm · Thread length: 75 mm · Width across flats: 15 mm · Width across flats: 17 mm · Width across flats: 19 mm · Ball bearing closed: No
EUR 47.70
GPO 17" spoke set incl. nipple (2.9 x 188 mm) black
Manufacturer: GPO · Material: Steel · Quantity: 36 pcs · Surface: varnished · Color: black · Length from hook: 188 mm · Ø spoke: 2.9 mm · Ø spoke head: 5.35 mm · Nominal diameter (thread): 3.15 mm · Thread length: 11 mm · Nipple length: 14 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Hook angle: 95 °
EUR 53.60
Rim ring 1.20 x 17" (47 mm) chrome
Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size: 17 " · Rim well depth: 6 mm · Nominal diameter: 433 mm · Jaw width [inch]: 1.2 " · Ø Nipple hole: 5.5 mm · Jaw width [mm]: 31 mm · Overall width outside: 47 mm · Number of spoke holes: 36 pcs
EUR 47.70
Collection only possible with online purchase and appointment.
