Engine mount 2.0 for Sachs 50/2, 50/3 and 50/4 engines. Revised version for a better fit of the engine.
The revised version can only be used in conjunction with the engine mount 2.0. Not suitable for the conventional engine mounts.
No more makeshift placement of wooden blocks during engine overhauls and tilting of the engine when tightening the screws.
We offer you an exclusive engine holder with which you can carry out revisions, tuning or other work on the engine conveniently and efficiently.
The mounting bracket can be rotated 360°. The holder is only fixed to one half of the housing. This means that gearbox revisions can be carried out in full.
Figure 1 shows the "Expert 2.0" engine stand with the engine mount. The scope of delivery corresponds to picture 3.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Area of application | Motor bracket |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
Hot 
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Width: 245 mm · Height: 340 mm · Hole spacing: 21.5 mm · Material thickness: 3.5 mm · Area of application: Motor bracket
EUR 88.50
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Strength class: 8.8
EUR 11.70
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Diameter: 24 mm · Diameter: 40.3 mm · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Number of components: 1 pcs · Total length: 120 mm
EUR 51.90
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Width across flats (trigger): 27 mm · Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Width across flats Screw: 19 mm · Total length: 57 mm · Strength class: 8.8
EUR 23.50
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Area of application: Special tool · Thread type: M6x1 (standard thread) · Ø inside: 64 mm · Thread length: 40 mm · Ø outside: 75 mm · Number of components: 4 pcs · Height: 16 mm · Sachs OEM no.: 0276 057 000
EUR 35.30
Not in stock
swiing® revival puller clutch basket manual | Sachs
Manufacturer: swiing® revival parts · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Area of application: (Dis)assembly tool · Thickness: 25 mm · Width across flats Screw: 19 mm · Number of components: 4 pcs · Total length: 106 mm · Thread type: MF12x1.25 (fine pitch thread)
EUR 38.90
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Number of components: 7 pcs · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Total length: 130 mm
EUR 23.50
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Manufacturer: swiing® ingenious parts · Diameter: 19 mm · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Ø inside: 27 mm · Number of components: 1 pcs · Ø outside: 93 mm · Total length: 290 mm · Height: 80 mm · Thickness: 5 mm · Ø Pin: 8 mm
EUR 56.60
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Width: 245 mm · Height: 340 mm · Hole spacing: 21.5 mm · Material thickness: 3.5 mm · Area of application: Motor bracket
EUR 88.50
Collection only possible with online purchase and appointment.
