Very useful tool for fixing the flywheel.
The flywheel stopper can be used on all Bosch and Ducati flywheels, as well as those with the same masses.
Stable construction made of galvanized steel. Comfortable rubber grip.
Ø outer plate: 93 mm
Ø inner plate: 51 mm
Pin spacing: 68 mm
Ø pins: 8 mm
Pin to heel length: 5.5 mm
Figure 3 shows the application of the tool.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue), rubberized |
| Diameter | 19 mm |
| Thickness | 5 mm |
| Ø outside | 93 mm |
| Ø inside | 27 mm |
| Total length | 290 mm |
| Height | 80 mm |
| Area of application | Special tool |
| Ø Pin | 8 mm |
| Number of components | 1 pcs |
| Universal | |
| Puch | |
| Sachs | 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 50/5 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV 505 (with pedal shaft) - 1A (AT) , 2A (HG) 535 |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
HPI flywheel (Bosch / Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Weight: 337 g · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5
EUR 113.80
BOSCH flywheel clockwise NOS | Puch E50
Manufacturer: BOSCH · Material: Steel · Thread type: MF26x1.5 (fine pitch thread) · Direction of rotation: right · Weight: 900 g · Ø cone small inside: 11.9 mm · Ø Internal flywheel: 91.2 mm · Ø cone large inside: 15 mm · Ø Flywheel outside: 115.8 mm · Cone length: 17.8 mm · Cone ratio: 1:5 · Thread length: 6.5 mm · Height: 36.6 mm
EUR 255.00
Explore categories from Tools
Moped fans also bought
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Number of components: 1 pcs · Area of application: (Dis)assembly tool
EUR 11.80
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Area of application: (Dis)assembly tool · Number of components: 1 pcs · Diameter: 24 mm · Diameter: 40.3 mm · Total length: 120 mm · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 52.10
GPO clutch trigger M27x1.25, M20x1 | Sachs 503, 50/2, 50/3, 50/4
Width across flats trigger: 27 mm · Manufacturer: GPO · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 23.60
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Ø outside: 75 mm · Height: 16 mm · Ø inside: 64 mm · Thread length: 40 mm · Number of components: 4 pcs · Area of application: Special tool · Sachs OEM no.: 0276 057 000
EUR 35.50
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Area of application: (Dis)assembly tool · Number of components: 7 pcs · Width across flats: 10 mm · Width across flats: 17 mm
EUR 23.60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
