Wheel bearing cone with M12 x 1 mm thread for front wheel and rear wheel of various mopeds, mopeds and small motorcycles.
The cone hardened by gas nitriding withstands the highest loads.
Wheel width: 15 mm
Height: 14.15 mm
Ø outer: 19.90 mm
The raceway is designed for 3/16" (Ø 4.78 mm) balls.
You can find the corresponding bearing balls, wheel axles, wheel nuts and other attachments in the accessories section.
Price per piece.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Surface | gas nitrided |
| Thread type | MF12x1 (fine pitch thread) |
| Width across flats | 15 mm |
| Color | black |
| Ø outside | 19.9 mm |
| Height | 14.15 mm |
| Ø ball [inch] / [mm] | 3/16" (4.78 mm) |
| Puch |
| Sachs |
Ratings
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nut type: Hexagon nut · Width across flats: 19 mm · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Thread depth: 10 mm · Height: 10 mm · Area of application: Standard
EUR 2.35
Nut M12x1 x 5 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nut type: Hexagon nut 0.5D · Width across flats: 19 mm · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Height: 5.8 mm · Area of application: Standard · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.15
swiing® revival wheel axle M12x1 x 165 ball bearing, galvanized version
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm · Ø shaft: 11.95 mm · Shank length: 75 mm · Thread length: 40 mm · Thread length: 50 mm
EUR 15.30
Moped fans also bought
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Material: Nylon · Surface: blank · Color: black · Ø Bundle: 24.1 mm · Ø outside: 20.2 mm · Total length: 19 mm · Ø inside: 16.2 mm · Puch OEM number: 349.1.42.005.1
EUR 2.95
Nut M12x1 x 5 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nut type: Hexagon nut 0.5D · Width across flats: 19 mm · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Height: 5.8 mm · Area of application: Standard · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.15
swiing® revival wheel bearing set M12x1 Ø 29 mm
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Thread type: MF12x1 (fine pitch thread) · Ø outside: 19.9 mm · Ø inside: 25.85 mm · Ø outside: 29 mm · Height: 10.6 mm · Height: 14.15 mm · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Width across flats: 15 mm
EUR 52.00
Collection only possible with online purchase and appointment.
