Complete screw set for the frame of your Piaggio Ciao PX or C24 moped / moped.
The PX is the model with round seat post and rear light on the luggage carrier. The C24 can be recognized by the sprung, square seat post and the rear light on the luggage carrier.
The screw set consists of galvanized steel screws.
A detailed list with the affiliation of the corresponding screws is included.
The following areas are covered:
- Headlight
- Fork swing arms
- Front and rear mudguards
- Cable duct under tank
- Engine mounting
- Zünd coil
- Splash guard under carburettor
- Pump holder under side guard
- Footboard holder and footboard
- Saddle and suspension
- Equipmentand struts and swing arm
- Pannier clamp and luggage hooks
- Return light on luggage
- Exhaust
- Chain tensioner
- Rear wheel hub and gearbox
- Transmission Gearbox
- Number plate or holder
Note: As the bolt set is designed for two different model series, individual bolts are not required and will remain unused.
Parts such as spacers and rubber buffers for the mudguard can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Piaggio | Ciao - PX, C24 |
Accessories & related products
swiing® revival screw set galvanized fan cover | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Thread type: M5x0.8 (standard thread) · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 8 pcs · Drive: Cross recess · Screw head: Panhead
EUR 5.80
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Manufacturer: Magura · Thread type: M4x0.7 (standard thread) · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm
EUR 2.35
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
EUR 35.30
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Test mark: none · Material: Plastic · Color: black · Color: red · Bulb holder: BA9s · Depth: 43 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Width: 130 mm · Height: 58 mm
EUR 22.30
GPO control bearing set | Piaggio Ciao
Height: 10.5 mm · Height: 17 mm · Ø inside: 27 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Manufacturer: GPO · Thread type: FG25.4 (1" 24G) · Material: Steel · Surface: galvanized (blue) · Color: silver · Bearing type: Bearing ring · Ø mounting frame: 30.05 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
EUR 22.30
Not in stock
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
EUR 23.50
Collection only possible with online purchase and appointment.
