Special M6 nut for fastening the sprocket to all sprocket hubs on your moped / moped.
This special design with a reduced key width of 8 mm was designed to ensure easy installation even in tight spaces.
The screw can also be used to mount the intake manifold on the Puch Velux, for example.
You can find more screws and complete sets in the accessories section.
Nostalgic product for the highest standards from the quality brand swiing®.
| Material | Steel |
| Drive | External hexagon |
| Manufacturer | swiing® revival parts |
| Surface | galvanized (blue) |
| Thread type | M6x1 (standard thread) |
| Nut type | Hexagon nut |
| Width across flats SW | 8 mm |
| Height | 6 mm |
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Cilo |
Accessories & related products
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Color: silver · Number of components: 24 pcs · Drive: External hexagon · Screw head: Hexagon · Thread length: 22 mm · Shank: No · Width across flats SW: 10 mm · Strength class: 8.8
EUR 9.35
swiing® revival screw set sprocket mounting Inox | Puch Maxi
Drive: External hexagon · Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Color: gray · Number of components: 24 pcs · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Shank: No · Width across flats SW: 10 mm · Thread length: 22 mm
EUR 15.30
swiing® revival screw set for sprocket mounting coaster brake
Drive: External hexagon · Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Color: gray · Number of components: 12 pcs · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Shank: No · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Thread length: 12 mm
EUR 23.50
swiing® ingenious screw set for sprocket mounting coaster brake racing
Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: galvanized (blue) · Surface: raw · Drive: External hexagon · Color: gray · Color: silver · Manufacturer: swiing® ingenious parts · Number of components: 12 pcs · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Shank: No · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Thread length: 18 mm
EUR 23.50
Moped fans also bought
GPO piston 41 mm (12 mm KoBo) | Puch X30 Velux, M50, MS50, VS50, DS50, VZ50
Nominal diameter: 41 mm · Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Compression height (C): 23.2 mm · Curvature (D): 3.7 mm · Total piston height (E): 49.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston weight: 85 g
EUR 59.00
swiing® ingenious cigar Ø 28 / 70 mm chrome (reso exhaust)
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Total length: 730 mm
EUR 112.20
EUR 118.10
Hot 
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRF · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m · Total length: 61.5 mm · Width: 47 mm · Height: 89 mm · Height: 112 mm · Area of application: Tuning
EUR 141.70
swiing® revival stud bolt cylinder base M6x26 - 10.9 strength | Sachs
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Diameter: 5.8 mm · Thread length: 9 mm · Thread length: 13 mm · Strength class: 10.9 · Total length: 26 mm
EUR 2.15
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, M50, MS
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Number of components: 4 pcs · Ø cylinder: 41 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø outlet inside: 27 mm · Area of application: Tuning · Hole spacing outlet: 32 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 23.50
Collection only possible with online purchase and appointment.
