High-quality M11x154 wheel axle made of galvanized steel for the front spoked wheel of your Puch Maxi S, N, X30 Sport, and Velux moped.
The wheel bearing shell included in the set is designed for spoke rims with a mounting diameter of 29 mm. This means they are compatible with various Puch and Sachs models, among others.
The cone and lock nut on the speedometer drive side are already pre-assembled and locked in place. This ensures the necessary clearance and eliminates the need for time-consuming spacing adjustments.
All components included in the wheel axle set feature high quality and durability. The threaded shaft, bearing cones, and bearing cups are made of hardened special steel.
The colored markings show you where each part goes:
- green mark: brake anchor plate
- red mark: wheel hub
- yellow mark: Spare disc for the speedometer drive (the disc is not needed if a drive is installed)
- blue mark: fork legs
You can find additional rim axles and replacement balls in the accessories section.
A nostalgic product from the premium swiing® brand that meets the highest standards.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Diameter | 11 mm |
| Total length | 154 mm |
| Ø ball [inch] / [mm] | 7/32" (5.56 mm) |
| Thread type | MF11x1 (fine pitch thread) |
| Ball bearing closed | No |
| Puch |
Accessories & related products
swiing® revival wheel axle set M11 x 180 spoke rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 180 mm · Thread length: 75 mm · Shank length: 30 mm · Width across flats: 15 mm · Width across flats: 17 mm · Width across flats: 19 mm · Ball bearing closed: No
EUR 47.30
Hot 
swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch
Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 29.02 mm · Ø inside: 12 mm · Ø shaft: 11.95 mm · Shank length: 74.5 mm · Thread length: 40.5 mm · Thread length: 50 mm · Width across flats: 19 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Height: 5.9 mm · Height: 9.9 mm
EUR 46.20
Hot
swiing® ingenious wheel axle with bearing conversion kit rear spoke hub | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Diameter: 29 mm · Ø shaft: 19 mm · Ø outside: 29 mm · Ø inside: 12 mm · Total length: 190 mm · Thread length: 29 mm · Thread length: 53 mm · Shank length: 100 mm · Width across flats: 19 mm · Ball bearing closed: Yes
EUR 46.20
swiing® revival wheel axle set M12x1 x 165 mm cast & spoke hub | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Diameter: 12 mm · Ø shaft: 11.95 mm · Total length: 165 mm · Thread length: 40 mm · Thread length: 50 mm · Shank length: 75 mm · Width across flats: 19 mm
EUR 35.50
Explore categories from Hub & axle
Moped fans also bought
Nos
Hot
BERU Spark Plug Connector, 1 kΩ, Noise-Suppressed, NOS
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Color: silver · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 11.80
swiing® revival Ball Holder 25/37/6.3 Kickbike
Bearing cage: Sheet steel cage ball-guided · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Ø inside: 25 mm · Bearing type: Ball ring · Ø outside: 36 mm · Width: 6.8 mm · Area of application: Standard
EUR 9.40
swiing® revival wheel axle set M11 x 180 spoke rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 180 mm · Thread length: 75 mm · Shank length: 30 mm · Width across flats: 15 mm · Width across flats: 17 mm · Width across flats: 19 mm · Ball bearing closed: No
EUR 47.30
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 22.40
Working late? Evening hours on Thursday until 20:00
