Used cylinder cover with 38 mm combustion chamber diameter suitable for Puch Maxi S / N, Puch X30 Sport NS / NL, Puch X30 Sport N-2AH, as well as converted Puch Supermaxi LG1 / LG2 mopeds / mopeds.
With small cooling fins, which are cooled by ambient air (airstream). The head has the original CH 9 (0.9 hp) stamping.
This cylinder head has a mount for fitting a decompressor.
Dimension (L x W x H): 13.5 x 12.5 x 5.5 cm
Used spare part which is in technically serviceable condition, signs of use are to be expected.
The cylinder head is sandblasted, the sealing surface should be briefly ground flat for safety reasons.
Original Puch spare part number: 349.8.10.101.1
| Manufacturer | Puch |
| Material | Aluminum |
| Surface | sandblasted |
| Ø cylinder | 38 mm |
| Total length | 135 mm |
| Performance | 0.9 Ps |
| Width | 125 mm |
| Height | 55 mm |
| Number of fixing points | 4 pcs |
| Decompressor | MF10x1 |
| Area of application | Original |
| Puch OEM number | 349.8.10.101.1 |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
swiing® revival stud bolt M6x106 (10.9 strength class)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 106 mm · Thread length: 12 mm · Thread length: 20 mm · Puch OEM number: 360.1.10.034.1
EUR 2.15
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 4 pcs · Thickness: 0.39 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 1.7 mm · Ø outlet inside: 20 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm
EUR 8.80
GPO Special Cylinder Stud Bolt Set M6x106, Galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 7 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 106 mm · Thread length: 15 mm · Thread length: 19 mm · Width across flats: 10 mm · Strength class: 10 · Strength class: 10.9 · Drive: External hexagon · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 23.60
38 mm Cylinder Head, 0.9 PS, with NOS Decals | Puch
Manufacturer: Puch · Material: Aluminum · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: MF10x1 · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Area of application: Original · Puch OEM number: 349.8.10.101.1
EUR 106.70
Explore categories from Cylinder
Moped fans also bought
Hot 
GPO Gear Ring 45 T, Black | Puch Maxi, X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Number of teeth: 45 pcs · Ø inside: 94 mm · Color: black · Thickness: 4.5 mm · Ø bolt circle: 105.5 mm · Cranking (offset): 8 mm · Hole spacing 2: 68 mm · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Number of fixing points: 6 pcs
EUR 29.50
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Area of application: Standard · Decompressor: Yes
EUR 11.80
Working late? Evening hours on Thursday until 20:00
