Used cylinder cover with 38 mm combustion chamber diameter suitable for the Puch Ur-Maxi S and Ur-Maxi N moped / moped.
An original cylinder head from the CH model with small cooling fins, which is cooled by ambient air (airstream). This head has an M10x1 thread for mounting a decompressor.
Dimension (L x W x H): 13.5 x 12.5 x 5.5 cm
Thread decompressor valve: MF 10 x 1 mm
Used spare part which is in technically serviceable condition, signs of use are to be expected. The cylinder head is sandblasted, the sealing surface should be briefly ground flat for safety reasons.
You can find the matching decompressor valve in the accessories section.
Original Puch spare part number: 349.2.10.401.1
| Manufacturer | Puch |
| Material | Aluminum |
| Surface | sandblasted |
| Ø cylinder | 38 mm |
| Width | 125 mm |
| Height | 55 mm |
| Total length | 135 mm |
| Number of fixing points | 4 pcs |
| Decompressor | MF10x1 |
| Area of application | Original |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Total length: 135 mm · Height: 55 mm · Ø cylinder: 38 mm · Width: 125 mm · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Standard · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.10
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Number of components: 4 pcs · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Decompressor: Yes
EUR 8.80
swiing® ingenious 38 mm cylinder kit CH12 "Tuning" camouflaged | Puch
Nominal diameter: 38 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Number of fixing points: 4 pcs · Inlet window: 23 / 20 x 14 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Alternative version of the Puch OEM number: 349.7.10.105.0
EUR 118.60
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 7 mm · Drive: External hexagon · Thread length: 15 mm · Thread length: 19 mm · Total length: 106 mm · Width across flats SW: 10 mm · Thread type: M6x1 (standard thread) · Strength class: 10 · Strength class: 10.9 · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 23.60
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 11.80
EUR 26.22/l
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Total length: 106 mm · Width across flats SW: 10 mm · Thread type: M6x1 (standard thread) · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.80
GPO screw set for engine mounting, galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Thread length: 23.5 mm · Shank: Yes · Number of components: 12 pcs · Storage method: Sack · Width across flats SW: 13 mm · Dimension storage box: 100 x 90 x 10 · Area of application: Standard · Strength class: 8.8
EUR 10.60
Athena 38 mm cylinder kit 50 cc camouflaged | Puch
Manufacturer: Athena · Material: Aluminum · Surface: sandblasted · Ø piston pin (B): 12 mm · Nominal diameter: 38 mm · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 38 mm · Ø cylinder neck: 47.7 mm · Ø outlet inside: 24.4 mm · Inlet window: 22 x 14 · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Outlet type: straight · Hole pattern [mm]: 44 x 44 · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Camouflaged: Yes · Area of application: Tuning
EUR 183.90
swiing® revival nozzle holder 2.20 Bing SRE & SRA
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Ø nozzle holder: 2.2 mm · Total length: 29.5 mm · Drive: External hexagon · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.20
EUR 9.85
Taillight (original) | Puch Velux X30
Color: gray · Test mark: none · Color: red · Ø Receptacle: 3 mm · Material: Plastic · Bulb holder: E10 · Height: 75 mm · Depth: 80 mm · Battery operated: No · Width: 35 mm · Brake light: No · Mounting type: Nuts & bolts · Reflectors: Yes · Number of fixing points: 1 pcs
EUR 56.90
Not in stock
Collection only possible with online purchase and appointment.
