Special, hand-made H100A+ racing exhaust system for your Puch moped / moped with E50 engine and exhaust outlet.
This racing exhaust is ideal for cross or racing use and, compared to the ADDY H100A, generates a strong power band, especially in the low to medium speed range, thanks to the extended midrange. The ideal exhaust timing for these racing engines is around 160 to 185 rpm.
Notes: We recommend using nuts with a key width of 8 or 9 mm for fastening to the outlet.
When used on a standard Puch Maxi frame, we recommend replacing the original fuel tap with an intermediate piece in conjunction with a 90° outgoing fuel tap.
Other complete racing systems as well as engine cases, cylinder kits and the aforementioned fuel outlet parts can be found in the accessories section.
Quality product from the ADDY by Schöb Engineering brand.
| Manufacturer | ADDY |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Ø Silencer | 55 mm |
| Mounting type | Nuts & bolts, Stud bolts & nuts |
| Total length | 870 mm |
| Number of fixing points | 3 pcs |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Flange |
| Puch | E50 |
Ratings
Accessories & related products
swiing® revival special nut M6 SW8 (sprocket ref. back pedal / intake manifold)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Width across flats: 8 mm · Height: 6 mm · Drive: External hexagon · Thread type: M6x1 (standard thread)
EUR 3.45
Gilardoni italkit cylinder head 47 mm (75 ccm)
Manufacturer: Gilardoni italkit · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Ø cylinder: 47 mm · Height: 58 mm · Total length: 155 mm · Width: 155 mm · Number of fixing points: 4 pcs · Ø screw holder: 6.5 mm · Hole pattern [mm]: 44 x 44 · Candle thread: long
EUR 81.80
Hot 
MLM exhaust "Crazy Pipe" black straight outlet | Puch
Manufacturer: MLM · Material: Steel · Surface: varnished · Color: black · Ø outside: 91 mm · Total length: 945 mm · Ø Internal connection: 22 mm · Ø Silencer: 45 mm · Number of fixing points: 3 pcs · Mounting type: Nuts & bolts · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts
EUR 409.20
Not in stock
ADDY exhaust H100A | Puch
Manufacturer: ADDY · Material: Steel · Surface: varnished · Color: black · Total length: 820 mm · Ø Silencer: 55 mm · Number of fixing points: 3 pcs · Mounting type: Nuts & bolts · Mounting type: Stud bolts & nuts · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 296.50
Explore categories from Exhaust system
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard · Width across flats: 7 mm · Ø outside: 8 mm · Ø Cable bushing: 2.3 mm · Thread length: 7 mm · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Drive: External hexagon · Drive: Slot · Thread type: M6x1 (standard thread)
EUR 2.95
Dell'Orto 21 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Color: black · Carburetor type: PHBG AS · Nominal diameter: 21 mm · Width: 72 mm · Total length: 82 mm · Height: 125 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 32 mm · Ø Air filter connection: 38 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Camouflaged: No · Nozzle size: 92 · Size of secondary nozzle: 50
EUR 142.30
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 65 mm
EUR 14.80
swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Total length: 8 mm · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100
EUR 24.80
Not in stock
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.80
Fortune / Merrick 2.50 - 2.75 x 17" inner tube
Manufacturer: Fortune · Tire width: 2.5 - 2.75 " · Tire width: 2.75 " · Tire width [mm]: 63.5 - 69.85 · Width: 2 1/2 " · Width: 2 3/4 " · Tire height [%]: 100 · Wheel size: 17 " · Old designation: 21 x 2.5 " · Old designation: 21 x 2.75 " · Valve type: TR4 Auto valve
EUR 14.10
Cable set E50 engine automatic black | Puch Maxi S / N
Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Outer shell length: 6000 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 23.10
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
