46 mm racing cylinder from Airsal suitable for Puch Maxi S & N, X30 Sport.
The racing kit has a straight exhaust, which is why standard exhausts for Puch mopeds can be fitted.
This is the largest possible racing kit that can be fitted without having to remove the engine housing.
| Manufacturer | Airsal |
| Material | Aluminum |
| Surface | sandblasted |
| Nominal diameter | 46 mm |
| Area of application | Tuning |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 12 mm |
| Hole spacing inlet | 38 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing outlet | 42 mm |
| Hole pattern [mm] | 44 x 44 |
| Outlet type | straight |
| Thread outlet | M6x1 (standard thread) |
| Camouflaged | No |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Airsal piston 46 mm | Puch
Nominal diameter: 46 mm · Manufacturer: Airsal · Ø outside piston (A): 45.95 mm · Compression height (C): 21.8 mm · Curvature (D): 3.7 mm · Total piston height (E): 48.6 mm · Number of piston rings (F): 1 pcs · Piston ring mold: L-ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston weight: 98 g
EUR 44.80
Airsal cylinder head 46 / 47 mm | Puch
Surface: sandblasted · Manufacturer: Airsal · Camouflaged: No · Material: Aluminum · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Width: 165 mm · Height: 60 mm · Total length: 180 mm · Ø cylinder: 46 - 47 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Ø screw holder: 7.2 mm · Decompressor: No · Number of fixing points: 4 pcs
EUR 62.50
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Width: 14.2 mm · Ø outside: 15 mm · Ø inside: 12 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
EUR 14.10
Moped fans also bought
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Area of application: Racing · Area of application: Tuning · Carburetor type: PHBG CS · Color: black · Nominal diameter: 19 mm · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Total length: 82 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Width: 70 mm · Mixed oil connection: Yes · Height: 124 mm · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45
EUR 141.70
Airsal intake manifold 46 / 47 mm cylinder | Puch
Manufacturer: Airsal · Camouflaged: No · Material: Aluminum · Total height: 75 mm · Area of application: Tuning · Mounting type: Screws · Hole spacing inlet: 38 mm · Ø inside: 19 mm · Height flange center hole: 65 mm · Ø External connection: 24 mm · Total length: 60 mm · Number of fixing points: 2 pcs
EUR 47.20
Collection only possible with online purchase and appointment.
