19 mm tuning intake manifold for Puch X30 Sport mopeds / mopeds with Z50 engine and Puch Maxi models which have an E50 engine installed.
The CNC-milled intake manifold is designed for Dell'Orto PHBG carburettors and has a round opening on the cylinder side.
On the Puch X30 it is still possible to fit the original side skirts, but it is not possible to operate the hand choke or fit an air filter. Cable chokes and replicas of the carburetor with service hatch at the bottom cannot be fitted.
| Ø inside | 19 mm |
| Manufacturer | AKOA |
| Camouflaged | No |
| Material | Aluminum |
| Ø External connection | 24 mm |
| Hole spacing inlet | 38 mm |
| Number of fixing points | 2 pcs |
| Total height | 68 mm |
| Height flange center hole | 57 mm |
| Mounting type | Nuts |
| Area of application | Tuning |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Width: 70 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 75 · Ø Inside entrance: 19 mm · Total length: 82 mm · Ø Output inside: 19 mm · Height: 124 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Ø Internal connection: 24 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Size of secondary nozzle: 45
EUR 142.30
swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Total length: 8 mm
EUR 24.80
swiing® ingenious intake manifold 16 mm | Puch X30 NS, NL, Sprinter
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 16 mm · Total length: 48 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total height: 70 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 59.20
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Nominal diameter: 19.5 mm · Width: 71 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG AS · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 85 · Total length: 71.5 mm · Height: 123 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Ø Internal connection: 24 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Tuning · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Size of secondary nozzle: 50
EUR 94.80
swiing® ingenious intake manifold 15 mm | Puch X30 NS, NL, Sprinter
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Total length: 48 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total height: 70 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 82.90
AKOA intake manifold 19 mm PHBG angular | Puch X30 NS, NL Z50, E50
Manufacturer: AKOA · Material: Aluminum · Camouflaged: No · Ø inside: 19 mm · Ø External connection: 24 mm · Number of fixing points: 2 pcs · Height flange center hole: 57 mm · Total height: 68 mm · Mounting type: Nuts · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 82.90
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.95 mm · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Strength class: 10.9
EUR 2.15
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Width: 70 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 75 · Ø Inside entrance: 19 mm · Total length: 82 mm · Ø Output inside: 19 mm · Height: 124 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Ø Internal connection: 24 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Size of secondary nozzle: 45
EUR 142.30
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nipple shape: Cylinder · Number of components: 1 pcs
EUR 2.85
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nipple shape: Pears · Number of components: 1 pcs
EUR 2.85
GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Graphite / Graphite · Material: Sealing carton · Ø outlet inside: 26.5 mm · Ø cylinder: 43.5 mm · Ø cylinder: 45 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 2.6 mm · Number of components: 4 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 X 44 · Hole spacing inlet: 38 mm
EUR 17.70
Working late? Evening hours on Thursday until 20:00
