High-quality clutch shoe with pressed aramid lining (colloquially known as Kevlar) for your Puch moped / moped with E50 engine.
The pad for the E50 centrifugal clutch has larger lubrication holes, which minimize wear and reduce weight. The special aramid lining offers exceptional durability, even under high loads.
| Thickness | 12 mm |
| Manufacturer | ASP |
| Material | Steel, Composite materials |
| Area of application | Tuning, Racing |
| Material addition | Aramid (colloquially known as Kevlar) |
| Number of jaws | 1 pcs |
| Puch | E50 |
Ratings
Accessories & related products
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Chrome steel (colloquially known as stainless steel) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 355.80
ASP clutch 3-jaw "sheet" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Thickness: 21.5 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 91.5 mm · Number of springs: 6 pcs · Area of application: Racing · Area of application: Tuning
EUR 284.60
ASP clutch 2-jaw "sheet" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Thickness: 21.5 mm · Number of jaws: 2 pcs · Ø outside: 91.5 mm · Number of springs: 4 pcs · Area of application: Racing · Area of application: Tuning · Alternative version of the Puch OEM number: VM 477.0 · Alternative version of the Puch OEM number: 349.1.12.004.0
EUR 201.60
ASP clutch 3-jaw "woven" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Thickness: 21.5 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 91.5 mm · Number of springs: 6 pcs · Area of application: Racing · Area of application: Tuning
EUR 284.60
Not in stock
ASP clutch springs reinforced 50 N/mm | Puch E50
Spring design: Pressure spring · Spring rate: 50 N/mm · Ø wire: 1.8 mm · Ø inside: 4.6 mm · Ø outside: 8.2 mm · Total length: 27 mm · Manufacturer: ASP · Number of components: 3 pcs · Material: Spring steel · Area of application: Racing · Area of application: Tuning
EUR 21.20
Explore categories from Clutch
Moped fans also bought
Exhaust manifold 28 mm chrome | Puch Maxi S / N, X30 NS, NL
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 24 mm · Mounting type: Stud bolts & nuts · Ø outside: 28 mm · Total length: 295 mm · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
EUR 20.10
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Thickness: 3 mm · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm · Area of application: Tuning
EUR 8.80
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 142.30
Hot 
swiing® ingenious exhaust clamp 28 mm heat-resistant
Manufacturer: swiing® ingenious parts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 25 - 28 mm · Mounting type: Nuts & bolts · Total length: 40 mm · Width: 40 mm
EUR 26.00
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
