Black anodized aluminium gearbox cover, suitable for your Puch moped / moped with E50 engine.
The gearbox cover is equipped with cooling fins to ensure optimum heat dissipation. The increased position of the oil filler hole makes it possible to fill 1.5 dl more oil, which further improves the cooling capacity.
The lid and the filler screw are included in the scope of delivery.
Note: The clutch cover fits both the standard clutch and the Tripple Clutch Racing clutch.
Other matching parts such as the complete Tripple-Clutch racing clutch can be found in the accessories section.
| Manufacturer | Made in Switzerland |
| Material | Aluminum |
| Surface | anodized |
| Color | black |
| Ø inside | 107 mm, 30 mm |
| Width | 116 mm |
| Height | 38.5 mm |
| Total length | 116 mm |
| Ø outside | 116 mm |
| Number of fixing points | 4 pcs |
| Puch | E50 |
Ratings
Accessories & related products
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.35 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
EUR 2.85
Moped fans also bought
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1600 mm · Nipple length: 12 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.85
Oil seal NBR 17/40/7 A DUO | Puch E50
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A DUO - With rubberized outer casing / two sealing lips. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Ø inside: 17 mm · Width: 7 mm · Ø outside: 40 mm · Area of application: Standard
EUR 6.05
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm · Color: gray
EUR 22.60
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.35 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
EUR 2.85
swiing® ingenious crankshaft "High End" C3/4 & FPM (+1 mm stroke) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Steel · Cheek type: Full cheeks · Thread type: MF10x1 (fine pitch thread) · Crankshaft stroke: 44 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Thread length: 11 mm · Ø piston pin (B): 12 mm · Thread length: 15 mm · Ø Connecting rod eye: 15 mm · Area of application: High End · Ø Bearing seat (clutch side): 17 mm · Weight: 970 g · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
EUR 274.60
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Ignition system: MVT Allumage · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Total length: 170 mm · Width: 150 mm · Height: 82 mm · Color: Chrome · Color: black-matt
EUR 178.60
Not in stock
Collection only possible with online purchase and appointment.
