Hot 
Racing cylinder cover with optimized 45 mm combustion chamber diameter suitable for Puch Maxi S/ N, Puch X30 Sport NS/ NL, Puch X30 Sport N-2AH, as well as converted Puch Supermaxi LG1/ LG2 mopeds / mopeds.
A good replica of the original CH model with small cooling fins, which is cooled by ambient air (airstream).
This head is the best choice for your 45cc Airsal, Swiing, Athena, GPO or ParmaKit racing kit (racing cylinder).
With a smaller and optimized combustion chamber and thus an increased compression. The cylinder head does not have a mount for fitting a decompressor.
Since the head has small cooling fins, it is absolutely inconspicuous and "camouflaged". The cylinder head is also sandblasted, which makes it appear even more inconspicuous.
Dimension (L×W×H): 13.5 × 12.5 × 5.5 cm
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Material | Aluminum |
| Surface | sandblasted |
| Total length | 135 mm |
| Ø cylinder | 45 mm |
| Width | 125 mm |
| Height | 55 mm |
| Area of application | Tuning |
| Candle thread | short |
| Decompressor | No |
| Number of fixing points | 4 pcs |
| Ø screw holder | 7.4 mm |
| Hole pattern [mm] | 44 x 44 |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO 45 mm cylinder head tuning Puch Maxi S, N / X30 NS, NL, N-2AH
Material: Aluminum · Surface: sandblasted · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Manufacturer: GPO · Number of fixing points: 4 pcs · Area of application: Tuning · Ø cylinder: 45 mm · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
EUR 38.40
swiing® ingenious gasket set 44 - 45 mm cylinder | Puch
Manufacturer: swiing® ingenious parts · Number of components: 4 pcs · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 11.50
swiing® ingenious 45 mm cylinder kit 70 ccm CH12 camouflaged | Puch
Surface: sandblasted · Nominal diameter: 45 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 38 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Area of application: Tuning · Inlet window: 23.6/21.2 x 14.7 · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Decompressor: No · Ø piston pin (B): 12 mm · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs
EUR 116.30
GPO 45 mm cylinder head tuning black | Puch Maxi S, N, X30 NS, NL, N-2AH
Manufacturer: GPO · Total length: 135 mm · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: varnished · Ø cylinder: 45 mm · Width: 125 mm · Height: 55 mm · Decompressor: No · Number of fixing points: 4 pcs
EUR 50.00
Moped fans like you also bought:
swiing nozzle set M3.5 (76 - 86) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Total length: 6 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Drive: Slot
EUR 18.50
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 65 mm · Choke control: Hand choke · Width: 47 mm · Height: 89 mm · Height: 109 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Area of application: Tuning · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.2 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 139.60
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Mounting type: Stud bolts & nuts · Material: Aluminum · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Camouflaged: Yes · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Ø inside: 17 mm · Height flange center hole: 42 mm · Total height: 53.5 mm · Total length: 38 mm · Hole spacing inlet: 38 mm
EUR 52.30
Collection only possible with online purchase and appointment.
