Gearwheel of the primary drive for 2-speed manual Z50 engines of Puch X30 NS, NL mopeds / mopeds.
This drive wheel is used in combination with clutch pistons, which have 19 teeth.
Number of teeth: 69
Toothing: helical
Mounting: 3-prong profile
Note: There may be a slight singing after installation until the tooth flanks are ground in cleanly on the clutch basket.
The fastening nut and other parts can be found under accessories.
Original Puch spare part number: 349.3.13.200.1
| Manufacturer | HS-Retro |
| Material | Steel |
| Toothing type | helical toothed |
| Recording type | 3-tooth splined shaft holder |
| Number of teeth | 69 pcs |
| Ø inside | 12.5 mm |
| Ø outside | 95 mm |
| Puch OEM number | 349.3.13.200.1 |
| Puch | Z50 (X30 Sport) |
Ratings
Accessories & related products
HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL
Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Surface: hardened & ground · Ø inside: 23.8 mm · Ø outside: 31.98 mm · Width: 7.55 mm · Puch OEM number: 329.1.13.065.1
EUR 70.40
HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL
Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Surface: hardened & ground · Ø inside: 19.44 mm · Ø outside: 28.1 mm · Width: 7.5 mm · Puch OEM number: 329.1.13.010.1
EUR 53.60
HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Toothing type: helical toothed · Ø inside: 17 mm · Number of teeth: 19 pcs · Ø outside: 74.8 mm · Height: 26.6 mm · Puch OEM number: 350.1.12.002.2
EUR 191.00
Explore categories from Gearbox & housing (motor)
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm
EUR 13.00
Not in stock
Airsal 46 mm cylinder kit straight exhaust | Puch
Nominal diameter: 46 mm · Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Area of application: Tuning
EUR 238.80
Surflex clutch plate set | Puch Z50
Ø inside: 46.3 mm · Ø inside: 51.3 mm · Manufacturer: Surflex · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Thickness: 2.75 mm · Material: Composite materials · Area of application: Original · Material: Steel · Recording type: Interlocking · Number of slats: 2 pcs
EUR 41.70
swiing® ingenious clutch spring reinforced +40% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.5 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: red · Ø inside: 30 mm · Number of components: 1 pcs · Ø outside: 39 mm · Total length: 23.5 mm · Area of application: Tuning
EUR 28.60
HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Toothing type: helical toothed · Ø inside: 17 mm · Number of teeth: 19 pcs · Ø outside: 74.8 mm · Height: 26.6 mm · Puch OEM number: 350.1.12.002.2
EUR 191.00
Collection only possible with online purchase and appointment.
