45 mm racing cylinder from Parmakit. Suitable for windshield-mounted Puch Maxi, Puch Supermaxi and Puch X30 mopeds.
The quality of the cylinder is very high. This makes it a reliable and durable cylinder kit.
A minimum of a 15 mm carburetor and a 22 mm exhaust should be fitted.
The cooling fins are slightly larger compared to the original Swiss cylinder. However, they look very similar to the original Puch Austria cylinder.
Scope of delivery according to figure 1.
Product of the Italian manufacturer Parmakit.
| Nominal diameter | 45 mm |
| Manufacturer | Parmakit |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 70 ccm |
| Crankshaft stroke | 43 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M6x1 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Camouflaged | No |
| Area of application | Tuning |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Surface: sandblasted · Width: 125 mm · Ø cylinder: 45 mm · Total length: 135 mm · Height: 55 mm · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 38.90
Parmakit piston 45 mm #C | Puch
Manufacturer: Parmakit · Ø outside piston (A): 44.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.45 mm · Curvature (D): 4.5 mm · Total piston height (E): 53.98 mm · Number of piston rings (F): 1 pcs · Nominal diameter: 45 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: C · Piston weight: 97 g
EUR 87.40
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Width: 14.2 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 14.10
Moped fans also bought
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm · Ø outside: 11.8 mm · Width across flats SW: 19 mm · Shank length: 100 mm
EUR 16.00
EUR 17.60
Flame tube 28 mm chrome | Puch Maxi S, N / X30 Sport
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 295 mm · Ø inside: 24 mm · Ø outside: 28 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
EUR 20.00
Alligator end piece for indoor cable, aluminum (per piece)
Ø outside: 3.1 - 4 mm · Manufacturer: Alligator · Material: Aluminum · Surface: raw · Number of connections: 1 pcs · Number of components: 1 pcs · Color: silver · Ø inside: 2.2 mm · Total length: 12 mm · Area of application: Standard
EUR 0.45
Collection only possible with online purchase and appointment.
