Strengthened clutch springs for the clutch of your Puch moped / moped with E50 engine.
These tuning springs are 50% harder than the original springs, making them ideal for use in moderately tuned engines.
With tuned engines, the clutch often engages too early when the engine is not yet up to speed. With the tuning springs, the centrifugal clutch engages later and the extra power is optimally transferred to the rear wheel.
The springs are coated in red and not painted, which prevents the paint from flaking off. The spring wire is made of valve spring steel, which makes it resistant to the highest loads!
The scope of delivery includes 3 pieces.
| Spring design | Pressure spring |
| Ø wire | 2 mm |
| Manufacturer | swiing® ingenious parts |
| Ø outside | 8.45 mm |
| Total length | 26.6 mm |
| Color | red |
| Material | Spring steel |
| Surface | coated |
| Number of components | 3 pcs |
| Ø inside | 4.3 mm |
| Area of application | Tuning |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø inside: 4.8 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Area of application: Tuning · Color: blue · Number of components: 3 pcs · Total length: 28 mm · Ø outside: 8.3 mm
EUR 21.20
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.9 mm · Color: yellow · Area of application: Tuning · Number of components: 3 pcs
EUR 21.20
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 0.5 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.45
Explore categories from Clutch
Moped fans also bought
Hot 
GPO 3-Jaw Clutch "Original" | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Area of application: Original · Area of application: Standard · Thickness: 20.9 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Number of springs: 3 pcs · Ø outside: 93 mm
EUR 59.20
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø inside: 4.8 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Area of application: Tuning · Color: blue · Number of components: 3 pcs · Total length: 28 mm · Ø outside: 8.3 mm
EUR 21.20
Hot
GPO 44 mm Cylinder Head Tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Area of application: Tuning · Total length: 135 mm · Width: 125 mm · Ø cylinder: 44 mm · Height: 55 mm · Number of fixing points: 4 pcs · Candle thread: short · Decompressor: No · Hole pattern [mm]: 44 x 44
EUR 50.90
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 0.5 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.45
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.65
Working late? Evening hours on Thursday until 20:00
