Complete thru axle for the front V 905 brake anchor plate on the wheel hub of your moped / moped with Sachs engine.
The set contains all the necessary washers, nuts, bearing cones, bearing balls and dust rings.
The cone and lock nut on the side of the speedometer drive are already pre-assembled. This provides the necessary distance and eliminates the need for time-consuming spacing.
Details
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
| Manufacturer | swiing® revival parts |
| Ball bearing closed | No |
| Material | Steel, Chrome steel (known as Nirosta®) |
| Surface | galvanized (blue) |
| Thread type | MF11x1 (fine pitch thread) |
| Diameter | 11 mm |
| Ø shaft | 11 mm |
| Total length | 145 mm |
| Width across flats SW | 17 mm |
Suitable for the following models
| Universal | |
| Sachs |
Accessories & related products
Moped fans like you also bought:
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 50 mm
EUR 26.70
Rear light glossy chrome - red
Test mark: none · Ø Receptacle: 3.5 mm · Material: Plastic · Color: Chrome · Color: red · Bulb holder: BA9s · Width: 65 mm · Depth: 55 mm · Height: 45 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 1 pcs
EUR 11.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 3.25
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Width: 6.8 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard · Ø inside: 25 mm · Ø outside: 36 mm
EUR 9.20
Cable set black | Sachs 50/2, 503 2AL/2BL (manual)
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 5 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1400 mm · Total length: 1600 mm · Total length: 2200 mm · Outer shell length: 1150 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 26.70
swiing® revival sealing rubber blower cover black | Sachs 50/2, 50/3, 50/4 (A1938)
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC-U_hard) · Ø inside: 16.95 mm · Ø mounting hole: 17 mm · Ø outside: 22.1 mm · Ø Bundle: 20.5 mm · Waistband height: 2 mm · Total length: 7.9 mm · Material thickness: 7.8 mm · Color: black · Pony OEM number: A1938 · Sachs OEM no.: 0260 044 000
EUR 9.20
Collection only possible with online purchase and appointment.
