High-quality axle including a complete conversion kit for upgrading the wheel bearing assembly from open-shoulder ball bearings to sealed industrial deep-groove ball bearings, suitable for mopeds with a Sachs V 905 wheel hub.
The special 32-mm-diameter bearing shells are press-fit in combination with the matching spacer and replace the conventional tapered roller bearing assembly with individual balls. This allows you to upgrade the front wheel bearing assembly to sealed deep-groove ball bearings. The bearing adapters feature two recesses, allowing you to continue using a speed sensor drive.
The conversion kit consists of a red anodized spacer tube, two reducer cups (bearing cups) with pre-pressed sealed ball bearings from SKF—the world’s leading ball bearing manufacturer—and a complete wheel axle with all necessary washers and nuts.
The two low-profile nuts on the speed sensor side are already pre-assembled in their fixed positions. This ensures the necessary spacing is provided, eliminating the need for time-consuming spacer installation.
The colored markings show you where each part goes:
- green mark: brake anchor plate
- yellow mark: Replacement washer for the speedometer drive (the washer is not needed if a drive is installed)
- red mark: wheel hub or ball bearing conversion kit
- blue mark: fork legs
A sophisticated product from the premium brand swiing® that meets the highest standards.
Manufacturer: swiing® ingenious parts · Material: Steel, Chrome steel (colloquially known as stainless steel) · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 11 mm · Total length: 150 mm
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø outside: 32 mm, 37 mm · Ø inside: 11.1 mm · Ball bearing closed: Yes
| Universal |
| Sachs |
Accessories & related products
swiing® revival wheel axle set V905 wheel hub front | Sachs
Diameter: 11 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Width across flats: 17 mm · Ø shaft: 11 mm · Total length: 145 mm
EUR 41.40
swiing® ingenious wheel axle for bearing conversion kit Sachs spoke hub V905 (3rd gen.)
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 11 mm · Total length: 150 mm
EUR 47.30
Not in stock
Explore categories from Hub & axle
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Surface: blank / oiled · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 14.80
Magura cable clamp Ø 8 x 15 mm
Ø Bundle: 6 mm · Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Total length: 15 mm · Screw head: Hexagon · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Width across flats: 7 mm · Drive: External hexagon · Drive: Slot · Thread type: M6x1 (standard thread) · Thread length: 7 mm
EUR 2.95
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Area of application: Standard · Material: Steel · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm
EUR 9.40
GPO speedometer drive 17" with hook 11 mm axle (for VDO speedometer cable)
Manufacturer: GPO · Material: Aluminum · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø mounting hole: 11 mm · Ø outside: 41 mm · Ø axle: 11 mm · Place of use: left · Place of use: right · Wheel size: 17 " · Total height: 10 mm · Thread type: MF10x1 (fine pitch thread)
EUR 33.10
swiing® ingenious wheel axle for bearing conversion kit Sachs spoke hub V905 (3rd gen.)
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 11 mm · Total length: 150 mm
EUR 47.30
Not in stock
Working late? Evening hours on Thursday until 20:00
