Solid clutch puller for the original clutch and clutches with corresponding hole spacing on your Puch Maxi moped / moped and others with E50 engine.
The clutch pack is screwed on cleanly with the black screws. The large, galvanized screw can then be used to apply pressure to the crankshaft to lift the clutch.
The matching, red anodized cover should always be used to protect the KW stub.
Attention: The tool only fits the original clutch and replacement clutches from Surflex.
Coupling hole spacing: 32 mm
Coupling thread: M6
&slash; inner shaft cover: 12.1 mm
You can find the corresponding clutch and other special tools for the E50 engine in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 905.6.34.109.0
| Manufacturer | swiing® revival parts |
| Area of application | (Dis)assembly tool |
| Puch | E50 |
Ratings
Accessories & related products
HK clutch "Racing" Aramid | Puch E50
Material: Steel · Manufacturer: HK Clutches · Material addition: Chrome steel (colloquially known as stainless steel) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 358.30
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Material: Aluminum · Material: Steel · Manufacturer: GPO · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 93 mm · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Thickness: 20.9 mm · Area of application: Original · Area of application: Standard
EUR 59.60
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Material: Spring steel · Color: blue · Total length: 28 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Surface: coated · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Area of application: Tuning · Number of components: 3 pcs
EUR 21.40
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Surface: blackened · Material: Steel · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8 · Number of components: 1 pcs · Area of application: (Dis)assembly tool
EUR 11.80
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Area of application: Standard · Number of components: 7 pcs · Decompressor: Yes
EUR 11.80
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 0.5 mm · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.45
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 1 mm · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.65
Hot 
DMP clutch "Racing" aluminum reinforced | Puch E50
Manufacturer: DMP · Material: Steel · Material addition: Chrome steel (colloquially known as stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 94 mm · Thickness: 22 mm
EUR 143.20
Collection only possible with online purchase and appointment.
