This aluminum cylinder, which is supplied with the matching cylinder head, is suitable for Piaggio Ciao, Bravo 1 and Boxer mopeds.
The 42 mm racing cylinder from Pinasco is one of the best cylinders for Piaggio currently available on the market. Perfect workmanship and detailed tuning characterize this 60 cc cylinder.
This racing cylinder has optimum power development in the high speed range due to its design and corresponding timing. As a result, it has slightly less torque at lower engine speeds.
The piston pin has a diameter of 10 mm.
Can be mounted on an original housing without any modifications.
In order to get the full performance out of this kit, we recommend installing an adapted engine housing. You can find this in the accessories section.
Quality product from the Italian manufacturer Pinasco.
| Manufacturer | Pinasco |
| Material | Aluminum |
| Surface | varnished |
| Displacement | 60 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 42 mm |
| Ø cylinder neck | 45.7 mm |
| Ø Outlet outside | 22.5 mm |
| Ø outlet inside | 18.5 mm |
| Ø piston pin (B) | 10 mm |
| Decompressor | Yes |
| Outlet type | clamped |
| Number of fixing points | 3 pcs |
| Hole pattern [mm] | 55 x 34 |
| Area of application | Tuning |
| Piaggio | Ciao - P, SC, PX, C24 Bravo / Super Bravo Boxer |
Accessories & related products
Pinasco 46 mm cylinder kit incl. head 10 mm KoBo | Piaggio SI, Bravo, Grillo
Material: Aluminum · Surface: sandblasted · Nominal diameter: 46 mm · Manufacturer: Pinasco · Number of fixing points: 3 pcs · Camouflaged: No · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Area of application: Tuning · Ø piston pin (B): 10 mm · Outlet type: clamped · Decompressor: Yes
EUR 354.50
Not so nice 
Pinasco crankshaft "Racing" 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Material: Steel · Dimension needle bearing: 10 / 13 x 14.2 mm (axe 10) · Manufacturer: Pinasco · Cheek type: standard · Crankshaft stroke: 43 mm · Ø coupling pin / vario pin: 12 mm · Connecting rod length center-center: 87 mm · Area of application: Racing · Total length crankpin ignition side: 91.5 mm · Total length crankpin ignition side: 105 mm · Ø crank webs: 69.7 mm · Ø piston pin (B): 10 mm · Thread type: M8x1.25 (standard thread) · Ø Connecting rod eye: 13 mm · Bearing seat right: 15 mm · Ø Bearing seat (ignition side): 15 mm · Thread length: 13.5 mm · Wide crank webs: 32.5 mm · Length 1st paragraph: 21 mm · Length 2nd paragraph: 44 mm · Length 3rd paragraph: 63 mm · Ø 1st step (on the coupling side): 15 mm · Ø 2nd shoulder (on the clutch side): 14.4 mm · Ø 3rd step (on the clutch side): 12 mm · Inlet control time: 146 ° · Control time before O.T: 88 ° · Control time according to O.T: 58 ° · Weight: 708 g · Number of gears: 1 pcs
EUR 259.90
Pinasco flywheel "Flytech" Carbon | Piaggio Ciao, SI, Bravo, Boxer
Material: Aluminum · Material: Carbon · Surface: varnished · Height: 38.7 mm · Manufacturer: Pinasco · Direction of rotation: right · Ø cone small inside: 12.4 mm · Ø cone large inside: 14.5 mm · Ø Flywheel outside: 135 mm · Cone length: 12.5 mm · Ø Internal flywheel: 106 mm · Thread type: MF16x1 (fine pitch thread) · Cone ratio: 1:5 · Thread length: 7.5 mm · Weight: 650 g
EUR 248.10
Pinasco 42 mm cylinder kit incl. head 12 mm KoBo | Piaggio Ciao, Bravo, Boxer
Material: Aluminum · Surface: varnished · Nominal diameter: 42 mm · Manufacturer: Pinasco · Number of fixing points: 3 pcs · Crankshaft stroke: 43 mm · Displacement: 60 ccm · Ø cylinder neck: 45.7 mm · Area of application: Tuning · Ø Outlet outside: 22.5 mm · Ø piston pin (B): 12 mm · Ø outlet inside: 18.5 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes
EUR 389.90
Not in stock
Pinasco 42 mm cylinder kit incl. head 10 mm KoBo | Piaggio SI, Bravo, Grillo
Material: Aluminum · Surface: varnished · Nominal diameter: 42 mm · Manufacturer: Pinasco · Number of fixing points: 3 pcs · Crankshaft stroke: 43 mm · Area of application: Tuning · Ø piston pin (B): 10 mm · Outlet type: clamped · Decompressor: Yes
EUR 389.90
Not in stock
swiing® ingenious stud bolt M7x120 / Ø 7.3 shank - 10.9 strength
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® ingenious parts · Total length: 120 mm · Diameter: 7.3 mm · Thread type: M7x1 (standard thread) · Strength class: 10.9 · Thread length: 20 mm · Thread length: 30 mm
EUR 5.80
Moped fans also bought
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Color: black · Color: red · Bulb holder: BA9s · Number of fixing points: 2 pcs · Test mark: none · Depth: 43 mm · Width: 130 mm · Brake light: No · Reflectors: Yes · Battery operated: No · Height: 58 mm · Mounting type: Nuts & bolts
EUR 22.30
Collection only possible with online purchase and appointment.
