This aluminum cylinder, which is supplied with the matching cylinder head, is suitable for Piaggio Ciao, Bravo 1 and Boxer mopeds.
The 42 mm racing cylinder from Pinasco is one of the best cylinders for Piaggio currently available on the market. Perfect workmanship and detailed tuning characterize this 60 cc cylinder.
This racing cylinder has optimum power development in the high speed range due to its design and corresponding timing. As a result, it has slightly less torque at lower engine speeds.
The piston pin has a diameter of 12 mm.
Can be mounted on an original housing without any modifications.
In order to get the full performance out of this kit, we recommend installing an adapted engine housing. You can find this in the accessories section.
Quality product from the Italian manufacturer Pinasco.
| Nominal diameter | 42 mm |
| Manufacturer | Pinasco |
| Material | Aluminum |
| Surface | varnished |
| Displacement | 60 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 45.7 mm |
| Ø Outlet outside | 22.5 mm |
| Ø outlet inside | 18.5 mm |
| Ø piston pin (B) | 12 mm |
| Outlet type | clamped |
| Number of fixing points | 3 pcs |
| Hole pattern [mm] | 55 x 34 |
| Decompressor | Yes |
| Area of application | Tuning |
| Piaggio | Ciao - P, SC, PX, C24 Bravo / Super Bravo Boxer |
Ratings
Accessories & related products
Malossi MP-One engine case electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Color: silver · Total length: 220 mm · Height: 174 mm · Manufacturer: Malossi · Material: Aluminum · Surface: sandblasted · Width: 104 mm · Ø inside: 24 mm · Ø outside: 140 mm · Ignition type: Electronic
EUR 274.60
Not in stock
Pinasco 46 mm cylinder kit incl. head 12 mm KoBo | Piaggio SI, Bravo, Grillo
Nominal diameter: 46 mm · Manufacturer: Pinasco · Camouflaged: No · Surface: sandblasted · Displacement: 70 ccm · Material: Aluminum · Crankshaft stroke: 43 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Area of application: Tuning · Decompressor: Yes
EUR 358.30
Pinasco *Competition* crankshaft Piaggio Ciao, SI, Bravo, Boxer (12 mm)
Manufacturer: Pinasco · Cheek type: standard · Area of application: Racing · Ø coupling pin / vario pin: 12 mm · Crankshaft stroke: 43 mm · Connecting rod length center-center: 87 mm · Number of gears: 1 pcs · Total length crankpin ignition side: 91.5 mm · Thread type: M8x1.25 (standard thread) · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 15 mm · Dimension needle bearing: 12 / 15 x 14.8 mm (axe 12) · Wide crank webs: 32.5 mm · Length 1st paragraph: 22.2 mm · Length 2nd paragraph: 43.4 mm · Length 3rd paragraph: 62 mm
EUR 316.50
Not in stock
Pinasco flywheel "Flytech" Carbon | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Pinasco · Material: Aluminum · Material: Carbon · Surface: varnished · Ø Internal flywheel: 106 mm · Direction of rotation: right · Weight: 650 g · Ø cone small inside: 12.4 mm · Ø cone large inside: 14.5 mm · Ø Flywheel outside: 135 mm · Cone length: 12.5 mm · Thread type: MF16x1 (fine pitch thread) · Cone ratio: 1:5 · Height: 38.7 mm · Thread length: 7.5 mm
EUR 250.80
Pinasco 42 mm cylinder kit incl. head 10 mm KoBo | Piaggio Ciao, Bravo, Boxer
Nominal diameter: 42 mm · Manufacturer: Pinasco · Material: Aluminum · Surface: varnished · Area of application: Tuning · Displacement: 60 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.7 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.5 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 10 mm · Hole pattern [mm]: 55 x 34 · Outlet type: clamped · Decompressor: Yes
EUR 394.10
Not in stock
Pinasco 42 mm cylinder kit incl. head 10 mm KoBo | Piaggio SI, Bravo, Grillo
Nominal diameter: 42 mm · Manufacturer: Pinasco · Material: Aluminum · Surface: varnished · Area of application: Tuning · Crankshaft stroke: 43 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 10 mm · Outlet type: clamped · Decompressor: Yes
EUR 394.10
Not in stock
swiing® ingenious stud bolt M7x120 / Ø 7.3 shank (10.9 strength)
Manufacturer: swiing® ingenious parts · Diameter: 7.3 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Thread length: 20 mm · Thread length: 30 mm · Total length: 120 mm · Strength class: 10.9
EUR 5.85
Collection only possible with online purchase and appointment.
